Оценок - 2, средний балл: 4 ( )

Производитель: 3Com Размер: 2.69 mb Название файла: twowireuserguide.pdf Язык инструкции:

4. In the Packet Size field, enter the packet size you wish to send. The maximum packet size is 576. 5. Check the Enable network name resolution checkbox. This will ensure that the name of the host location is displayed along with the corresponding IP address. 6. Click the Start button. The results are displayed on the page as they occur, and include round trip latency; the aggregate number of packets sent, received, and lost; and the minimum, maximum, and average round-trip latency. To discontinue Ping or Traceroute, click the Stop button. To perform a DNS query: 1. From the drop-down menu, select DNS Query. 2. In the Host field, enter the domain name (URL) for which you wish to obtain the IP address. 3. Click the Start button. Management and Diagnostic Console Troubleshooting - Upgrade History Page The Troubleshooting - Upgrade History page shows a log of all system software upgrades, and lists the upgrades in the order in which they occurred. Figure 43. MDC Troubleshooting Upgrade History Page The Upgrade History page shows the following information. Item Description Model number The 2Wire gateway model number. Hardware version The current 2Wire gateway hardware version. Software version The current 2Wire gateway software version. Upgrade Log The initial software version, and a record of the last 10 upgrades. Management and Diagnostic Console Troubleshooting - Resets Page Note: To access this page, your organization must have the Remote Management feature enabled. If the feature is not enabled, an error message will display when you click the link to access this page. The Troubleshooting – Resets page allows you to reset various components associated with the 2Wire gateway network. Figure 44. MDC Troubleshooting Resets Page The Clear button in the Local Network field clears all devices from the Local Network list. Doing so will change the configuration settings, and may affect 2Wire gateway operation because it removes all devices (such as computers) from your network. The Reset button in the DSL Connection field retrains the 2Wre gateway’s DSL connection. The Reset button in the ISP Connection field resets the PPP connection and/or releases and renews the broadband IP address. Management and Diagnostic Console The Reset button in the Broadband Link field allows you to reset the 2Wire gateway broadband link. For 2Wire gateway models with a DSL connection, this means the DSL connection is reset. The Reset button in the Gateway field allows you to restart the 2Wire gateway. During 2Wire gateway restart, the Troubleshooting page cannot be accessed until the 2Wire gateway completely restarts and the connection is reestablished. The Reset button in the to Factory State field resets the 2Wire gateway to an unprovisioned default state. Doing so will remove all your configuration settings, and requires 2Wire gateway software reinstallation. Warning: Resetting the 2Wire gateway to an unprovisioned default state will clear all update records from the Upgrade History page, and delete all provisioning, firewall, and Enhanced Services configuration settings. Management and Diagnostic Console Advanced - Syslog Settings Page The Advanced - Syslog Settings page allows users to maintain a history of security events greater than the capacity of the 2Wire gateway by enabling a syslog server. Note: Use of this feature requires a UNIX or Linux computer running a syslog daemon. Figure 45. MDC Advanced Syslog Settings Page To enable syslog and specify the location of a syslog server: 1. Check the Enable Syslog checkbox. 2. In the Server Location field, enter the IP address of a UNIX or Linux computer running a syslog daemon. 3. Optional: In the Server Port field, enter the outbound port number upon which the syslog server is located. 4. To limit the number of log packets, check the Enable Throttling checkbox. 5. In the Limit Logging to field, enter the number of logs per second that you wish to log. 6. Click the Submit button. Management and Diagnostic Console Advanced - Provisioning Info Page The Advanced – Provisioning Info page displays the parameters with which the 2Wire gateway was provisioned. Figure 46. MDC Advanced Provisioning Information Page Management and Diagnostic Console The gateway provisioning parameters are dynamic, and vary depending on the software version that the gateway is running. • Module Configuration. Configuration parameters for modules listed in the Advanced Link Manager States page. The parameters are set by broadband provisioning. • UI Param Configuration. Configuration parameters that affect the user interface and user interaction. The parameters are set by broadband provisioning. • Server Set Configuration. Configuration information defining how the gateway is connected to and interacts with backend provisioning. • Firewall Configuration. Configuration information for the firewall. Management and Diagnostic Console Advanced - Configure Time Services Page Note: To access this page, your organiza...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: