Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
2 Double-click the Control Panel icon. 3 Double-click the Network icon. 4 Select the 3Com Megahertz LAN PC Card. 5 Click Properties. 6 Click Advanced. ¦ For network driver optimization, click DOS Client or Windows or OS/2 client or server. ¦ For full duplex, click enable to use full duplex and disable if you do not want to use full duplex. Only use full duplex if you have a full duplex network. ¦ For NDIS driver version, click auto-select, NDIS 3, NDIS 4, or NDIS 5. NDIS 5 only works with Windows 98. If you select NDIS 5 for Windows 95 OSR2, NDIS 4 will be used. If you select NDIS 5 for Windows 95 version A, NDIS 3 will be used. ¦ For transceiver type, click TP (RJ-45), Coax (BNC), or Auto-Select. 7 Close the windows and reboot the notebook. The values are changed. Windows NT 4.0 Use this procedure to change the I/O Base Address and Interrupt values using Windows NT. 1 From the Control Panel double-click Network. 2 Click the Adapters tab. 3 Select 3Com Megahertz LAN PC Card (Ethernet) and click Properties. 4 Change the I/O or IRQ value and click OK. DOS Configuration Program To change the configuration on a DOS notebook, see the INSTRUCT.TXT file in the HELP directory on LAN Installation Disk 2. DYNAMICACCESS 5 DynamicAccess software adds intelligence to 3Com PC Cards for improved performance, management, and control of your network. DynamicAccess software 1.5 is an advanced network driver that integrates dRMON, Fast IP, Traffic Prioritization, and Efficient Multicast Control support. ¦ Traffic Prioritization provides a standards-based solution, preventing delays in transmissions of mission-critical or real-time traffic and extends this capability to the WAN. ¦ Fast IP alleviates router bottlenecks in today's any-to-any networks and intranets, where a growing percentage of traffic travels between rather than within subnets. ¦ Efficient Multicast Control prevents flooding of switched networks by multicast applications such as video training, stock quotes, or online news. For complete information on how to use DynamicAccess software, see the DynamicAccess software documentation on the DynamicAccess Disk. Be sure to visit the 3Com Web site for additional postings of FAQs for the Edge Monitor System and new DynamicAccess software versions and information at: DynamicAccess software offers easy centralized installation through login scripts or other popular software distribution platforms. These installation methods eliminate the need to touch each end node PC to install the client software to get the advantages of dRMON and the Edge Monitor. CHAPTER 5: DYNAMICACCESS Using DynamicAccess Software Version 1.5 with the Edge Monitor System The Edge Monitor System operates as described in the Transcend dRMON Edge Monitor System User Guide. Follow the instructions in the Release Notes and the user guide. The new software for the end nodes should be installed according to the instructions included in the file on the disk. The following issues, in addition to the installation instructions, must be observed for a successful installation: ¦ If you have already installed the DynamicAccess software version 1.5 on your end nodes and now plan to install the Transcend dRMON Edge Monitor System, do not install the dRMON SmartAgent software from the CD on to your end nodes. You only need to ensure that the password you set for the end nodes with KEYSET.EXE matches the password you use for your Edge Monitor. ¦ Do not install the DynamicAccess software version 1.5 on the PC where you install the Edge Monitor. The data reported by the Edge Monitor will be inaccurate because it will track its own traffic statistics twice. ¦ If you install DynamicAccess software on a PC running Windows NT Server, the dRMON software that collects statistics is inactive. To activate the dRMON collection, change the value of the following registry REG_DWORD from 0 to 1 with Regedit: HKEY_LOCAL_MACHINE\System\ CurrentControlSet\Services\ DAPassThru