Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Refer to the Appendix at the end of this document for instructions on how to connect the SCSI Connected Storage Device. LCD Menu Press the “X” key to display the LCD Menu: In the LCD panel, an arrow displays to the left of the currently selected menu item. Use the up or down arrow keys to navigate the menu. After making your menu selection, press the checkmark key to accept your selection. NOTE: On the LCD Menu, press “X” to toggle the display between the main menu and the following information: “Enterprise Reporter (software version number)” and “Database Status (Active, Inactive)”. 8e6 menu When “8e6 >” is selected, the following menu items display on the screen: Current Patch Level IP / LAN1 > LAN 1 Link Status Gateway DNS 1 > DNS 2 > Host Name > Regional Setting (Time Zone, date, time) Reset Admin Console Password Reboot > Shutdown > NOTE: Navigation tips in the 8e6 menu: • Use the up / down arrow key to scroll up / down the menu • Press the checkmark key to choose the current selection • Press the “X” to go back to the previous screen Make a selection from the menu, and press the checkmark key to go to that screen. Current Patch Level When the Current Patch Level option is selected, “Enterprise Reporter” and the version number of the currently installed build displays. IP / LAN1 When the IP / LAN 1 option is selected, the IP / LAN 1 screen displays with the following menu items: Configure LAN 1 IP Change LAN1 Netmask A. Choose Configure LAN 1 IP and press the checkmark key to go to the Configure LAN 1 IP screen. B. Use the up / down keys to increase / decrease the current value, and the left / right arrow keys to navigate across the line. C. Press the checkmark key to accept your entry and to return to the previous screen. D. Choose Change LAN1 Netmask and press the checkmark key to go to the Change LAN1 Netmask screen. E. Use the up / down keys to increase / decrease the current value, and the left / right arrow keys to navigate across the line. F. Press the checkmark key to accept your entry and to return to the previous screen. G. Press the “X” key to return to the 8e6 menu. LAN 1 Link Status When the LAN 1 Link Status option is selected, the LAN 1 Link Status screen displays with the following menu items: Change NIC Mode Lan1 Status NOTE: For Lan1 Status, the current Lan1 status displays: “auto” or “Disconnected”— the latter displays if the NIC card is not connected to the network. A. Choose Change NIC Mode and press the checkmark key to go to the Change NIC Mode screen with the following options: Modes Note NOTE: If “Note” is selected, and the right arrow key is pressed, the following message displays: “Remember to reboot the machine for these changes to take effect.” B. Choose Modes, and use the left / right arrow keys to view the available NIC mode selections. C. After making a selection, press the checkmark key to display the Save Changes? screen: Choose Yes to save your changes and to return to the 8e6 me...
Эта инструкция также подходит к моделям:Сетевое оборудование - Enterprise Reporter HL-002-002 (3.17 mb)
Сетевое оборудование - Enterprise Reporter HL-002-002 (3.17 mb)
Сетевое оборудование - Enterprise Reporter HL-002-002 (3.17 mb)
Сетевое оборудование - Enterprise Reporter HL-022-002 (3.17 mb)