Войти:
Оценок - 5, средний балл: 3.6 ( )

Инструкция по эксплуатации ADC, модель TrueNet TracerLight TrueNet TracerLight

Производитель: ADC
Размер: 233.76 kb
Название файла: a5005f1d-7a0e-45d7-a812-31e7678e260e.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Each end of a TracerLight patch cord features a flashing light source allowing technicians to visually trace individual patch cords from one end to the other without pulling or affecting the patch cord. Features: • Dramaticallyminimizestheriskoftakingthewrongfiberoutofservice• Improvessystemturnupspeedandaccuracy• TracerLightpatchcordsmeetallperformancecriteriaofstandardADCpatchcords• IdeallysuitedforSAN(StorageAreaNetwork)andcross-connectpatching• 72%reductioninjumperturn-uptimesand13%reductioninaccidentaldown-time. TracerLight pays for itself again and again! TrueNet® TracerLight® Connector Identification System ADC‘s innovative TracerLight® Connector Identification System offers a quick and accurate method of identifying the termination point of optical patch cords. Each end of a TracerLight patch cord features a flashing light source allowing technicians to visually trace individual patch cords from one end to the other without pulling or affecting the patch cord. Features: • Dramaticallyminimizestheriskoftakingthewrongfiberoutofservice• Improvessystemturnupspeedandaccuracy• TracerLightpatchcordsmeetallperformancecriteriaofstandardADCpatchcords• IdeallysuitedforSAN(StorageAreaNetwork)andcross-connectpatching• 72%reductioninjumperturn-uptimesand13%reductioninaccidentaldown-time. TracerLight pays for itself again and again! 12/07 • 103472AE TrueNet ® TracerLight ® TrueNet®TracerLight® Connector Identification System TracerLight Patch Cord TracerLight optical patch cords feature a flashing light source (LED) component near each connector end. The TracerLight power source is inserted with minimal force into the TracerLight component on one end of the patch cord. This causes the LED on each end to begin flashing rapidly. As a result, the distant end of the patch cord can be quickly and easily identified without interruption of service. Available in any standard length or connector style, TracerLight patch cords have the same functions, features, and stringent environmental requirements as our standard patch cords. Optical performance of the patch cords is not affected by the TracerLight components. TracerLight patch cords are installed in the same manner as standard patch cords and can be pulled through ADC‘s FiberGuide® Fiber Cable Management System with ease. Also compatible with ADC's Next Generation frame with term block counts up to 144. TracerLight Patch Cord Description Catalog Number1 Multimode Duplex TracerLight Patch Cords LC-LCwith50/125multimodelaseroptimizedto300m,aquaFTL-PPKXXXM LC-SCwith50/125multimodelaseroptimizedto300m,aquaFTL-9PKXXXM SC-SCwith50/125multimodelaseroptimizedto300m,aquaFTL-99KXXXM Singlemode Duplex TracerLight Patch Cords LC-LCSinglemodeFTL-CCZXXXM LC-SCSinglemodeFTL-7CZXXXM SC-SCSinglemodeFTL-77ZXXXM Ordering Information 1XXX – Length in meters. Standard lengths: 001 = 1 meter, 002 = 2 meters, 003 = 3 meters, 005 = 5 meters, 006 = 6 meters, 010 = 10 meters, 015 = 15 meters. Duplex Aramid Yarn Strength PVC 26 AWG JacketMembers Tight Copper Buffered PVC Wire (2) Fiber Jacket 2w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 TrueNet®TracerLight® Connector Identification System TracerLight Power Source The compact power source is comprised of a lightweight, plastic flashlight body featuring two AA batteries and a printed circuit board (PCB). It provides approximately 80 hours of continuous service and features 1-hour auto-off. The end of battery life is indicated by a slowing of the blink rate. TracerLight Power Source 12/07 • 103472AE TrueNet ® TracerLight ® Description Catalog Number Power Source FTL-PSOrdering Information Specifications CoNNeCTorS (Singlemode and Multimode) Intermateability: TIA/EIA-604-X SC: FOCIS-3 LC: FOCIS-13* Connector Body SC and LC: Plastic Ferrule: TIA/EIA-604 LC: Zirconia, 1.25 SC: Zirconia, 2.5 Connector Color: GR-326 Singlemode PC: Blue APC: Green Multimode SC: Black LC: Beige (Specifications continued on next page.) 3w w w . a d c . c o m • + 1 9 5 2 9 3 8 8 0 8 0 • 1 8 0 0 3 6 6 3 8 9 1 Specifications (cont.) oPTICAL (Multimode) operating Wavelength: 850 and 1300 nm; all tested at both wavelengths Insertion Loss: 0.3 dB maximum oPTICAL (Singlemode) operating Wavelength: 1310 and 1550 nm; all tests below apply at both wavelengths Insertion Loss: PC: 0.2 dB maximum APC: 0.5 dB maximum return Loss: PC: 57 dB minimum APC: 60.5 dB minimum MeChANICAL (Singlemode and Multimode) Vibration: GR-326 and FOTP 11; .IL < 0.3 dB; 3 planes, 6hrs. 10-55 Hz Flex Cycling: GR-326 and FOTP 1; .IL < 0.3 dB; 100 cycles with 2lbs. load Twist: GR-326; .IL < 0.3 dB; 3lbs; 5 turns, 9 cycles Mating Durability: FOTP-21A; .IL < 0.3 dB; 500 cycles Tensile Load (Proof): GR-326 and FOTP-6; .IL < 0.3 dB; 15 lbs. at 0. and 7.5 lbs. at 90. Impact: GR-326 and FOTP-2; .IL < 0.3 dB; 8 drops from 1 meter (or 1.5 meters) eNVIroNMeNTAL (Singlemode and Multimode) Thermal Age: GR-326 and FOTP-4; .IL < 0.3 dB; 7 days at 85.C Thermal Cycle: GR-326 and FOTP-3A; .IL < 0.3...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории