Войти:
Оценок - 4, средний балл: 4.8 ( )

Инструкция по эксплуатации Adder Technology, модель 1xN

Производитель: Adder Technology
Размер: 199.74 kb
Название файла: a7d7e429-1696-3af4-117d-830fedcc1592.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


INSTALLATION .......................................................3 3. CONFIGURATION ...................................................4 4. OPERATIONAL DESCRIPTION .............................5 5. NORMAL OPERATION ...........................................6 6. PROTECT OPERATION...........................................6 7. PROTECTION SWITCH ...........................................8 8. SWITCHBACK ........................................................10 9. AUTO-PROTECT OPERATION ............................11 10. SPECIFICATIONS ..................................................12 11. MAINTENANCE .....................................................12 12. WARRANTY AND CUSTOMER SERVICE.........12 FIGURES Figure 1. 1xN Pro-Cap....................................................1 Figure 2. SCIM Card Elements ......................................4 Figure 3. Normal Operation ...........................................6 Figure 4. Arming Operation ...........................................8 Figure 5. Protect Operation ..........................................10 Figure 6. Switchover.....................................................10 Figure 7. Total Access 3000 Auto-protect Switching..11 TABLES Table 1. LED Indication................................................3 Table 2. In-Band Commmands .....................................7 Table 3. Out-Of-Band Commands ................................7 Table 4. In-Band Enable/Disable Protocol ...................8 Table 5. In-Band Protection Switch Protocol ...............9 Table 6. Out-Of-Band Enable/Disable Protocol ...........9 Table 7. Out-Of-Band Protection Switch Protocol.......9 Table 8. In-Band Protection Release Protocol............11 Table 9. Out-Of-Band Protection Release Protocol ...11 Table 10. Specifications ................................................12 1. GENERAL This practice provides installation and operational procedures for the ADTRAN‚ Remote 1xN Pro-Cap protection switch multi-mount housing (P/N 1190860L1). See Figure 1. Pro-Cap initiates remote switching of a DS1 or HDSL circuit to a standby line following detection of a fault. This eliminates the immediate need for a vehicle dispatch to investigate trouble or provide standby service. The shelf also accommodates DDS and ISDN technologies but without protection. Section 61190860L1-5B Issue 2, January 2002 CLEI Code: NCM5NTDD_ _ Figure 1. 1xN Pro-Cap Pro-Cap can be used in conjunction with the ADTRAN Total Access® 3000 Carrier Class Broadband Multiservice Access Platform, or any standard Office Repeater Bay (ORB) with T1 or HDSL to provide a Protection Switching Network Interface (PSNI). The Pro-Cap housing accepts eight T200 type circuit cards or four dual slot T400 DS-1, HDSL, or HDSL2 circuit cards. The unit is a wall mounted assembly that provides convenient access to CPE connections. The assembly incorporates a circuit board backplane that provides a choice of amphenol connector or wire-wrap pins for facility wiring hook-up. The Pro-Cap accepts -48 VDC local power or a modular power supply that inserts into the POWER slot at the far right of the shelf. The power supply module includes an AC power cord that plugs into a standard 110 VAC grounded outlet. The Switch Customer Interface Module (SCIM) can mount to either the left or right side of the Pro-Cap housing to facilitate access to all CPE connections. 61190860L1-5B Trademarks: Any brand names and product names included in this document are trademarks, registered trademarks, or trade names of their respective holders. The SCIM can be locally powered by -48 VDC, or span powered from the standby unit in slot 8 if equipped for span power. Slide switch S1 selects between local or span power. CPE receive and transmit connections are either amphenol or RJ-48C jacks. Revision History Issue 2 adds Auto-Protect information when the Pro-Cap is configured in a Total Access 3000 network. Features The 1xN Pro-Cap includes these features: • Protection module. • Compact and lightweight assembly that accommodates eight T200 mechanics or four T400 mechanics modules. • Reversible SCIM for right side or left side assembly. • Prewired backplane to minimize wiring errors and installation time. • Protect module can function as standard channel module. • Dedicated slot for modular power supply. • LEC facility connections are made by 25-pair Amphenol XMT/RCV connectors or wire-wrap pins. • CPE connections are made to RJ-48C modular jacks or 25-pair Amphenol XMT/RCV connectors. • Auto-Protect Switching with Total Access 3000 applications. • Swing open tinted Plexiglas front cover. • Available with key-locking metal cover (List 4 Option). • Includes standard 10-year warranty. Physical Description The 1xN Pro-Cap consists of four elements: 1. Mounting-Plate The mounting-plate attaches to a customer premises backboard. 2. Shelf The shelf has slots for seven channel modules, one standby (protect) module, and one power module, plus two external edge connector...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории