Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
2 LED Indicators ..................... 2 Hardware Installation ............. 3 Software Driver Installation ... 4 EMI Certification ..................... 4 Pages 2 to 5 see this side Pages 6 to 8 see this side Specifications ......................... 6 Software Drivers .................. 6 Technical Support .................. 7 Warranty .................................. 8 Hardware Description Before you insert the Fast EtherCard-32 into your machine, please verify if your notebook supports the CardBus standard and provides a Type-II or Type-III slot. This CardBus PC card’s main PCB board is encased in a stainless compact frame that is easily transportable. It provides a 68-pin connector for connecting to the PC and a 15-pin flat connector for attaching the RJ-45 media coupler. LED Indicators (on Media Coupler) Link/Activity Indicator Color: Green Function: The “Link/Act” LED on the adapter’s media coupler lights up to indicate a successful network connection. Flashing indicates the presence of network packets passing through the connected port. The rate of flashing is proportional to the amount of network traffic. 100 Mbps Indicator Color: Green Function: The “100” LED lights up to indicate the port is operating at 100Mbps (for a 100BASE-TX connection). Hardware Installation 1. Select an empty CardBus PC Card slot and insert the Fast EtherCard-32 into that slot as shown below. 2. Connect the RJ-45 media coupler’s 15-pin connector to the PC card. 3. Connect the media coupler to a network hub or switch using UTP cable with RJ-45 connectors. Use Category 3, 4 or 5 for 10Mbps connections and Category 5 for 100Mbps connections. The UTP cable should have a maximum length of 100m (328ft). Fast EtherCard-32 LED Indicators RJ-45 Connector Host PC Hub 4. Power on your PC and install the appropriate network driver for your operating system. Drivers can be found on the Driver Diskette. Notes: 1. The card auto-negotiates the speed and duplex mode of the network connection, providing seamless operation on either 10 or 100 Mbps segments. 2. Full-duplex communications allows data to be sent and received simultaneously, doubling the effective throughput. Refer to the readme files on the driver diskette for information on setting the duplex mode. Software Driver Installation The diskette, labeled Driver Diskette, comes with the package containing all the software drivers available for the PC Card. A RELEASE.TXT file, describing the contents of the diskette is found in the root directory. Different drivers are stored in separate subdirectories, which also include a text file. Select the driver you need and refer to the text file for the installation procedure. EMI Certification FCC Class B Certification Accton Technology Corporation Model Number: EN2220 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from the one which the receiver is connected to. • Consult the dealer or an experienced radio/TV technician for help. You may use unshielded twisted-pair (UTP) cable for RJ-45 connections. You are hereby cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The user may find the following booklet prepared by the Federal Communications Commission helpful: The Interference Handbook This booklet is available from the U.S. Government Printing Office. Washington, D.C. 20402. Stock No. 004-000-00345-4. Note: In order to maintain compliance with the limits of a Class B digital device, Accton requires that you use a quality interface cable when connecting to this device. Changes or modifications not expressly approved by Accton could void the user's authority to operate this equipment. Suggested cable type is unshielded twisted-pair (UTP) for RJ-45 connections. Industry Cana...