Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
EchoView - Wireless Video Adapter Manual Version 0.3 5 2 Configuration and Setup2 2.1 Network Connections The wireless video adapter needs to assign your PC an IP address. Please configure your wireless network interface to obtain IP address and DNS automatically. 1. Log on to your PC with an administrative privilege user account. 2. Click Start and then click Control Panel. 3. Double-click on Network Connections, right-click on wireless network connection and then click Properties. 4. Double-click on Internet Protocol (TCP/IP) and the Internet Protocol (TCP/IP) Properties dialog window (figure 1) appears. 5. Click Obtain an IP address automatically and click Obtain DNS server address automatically. 6. Click OK to apply the setting and the dialog window will close. Figure 1: TCP/IP Properties 2.2 LAN Settings If your PC is configured to connect to the proxy server, then please follow the instructions below on how to temporarily disable the proxy server connection while using the Addlogix wireless video adapter. For Internet Explorer users: 1. Open Internet Explorer. 2. Click Tools from the menu bar and click Internet Options. 3. Click Connections tab and click LAN Settings…. 4. In the Local Area Network (LAN) Settings dialog window (figure 2), uncheck the option Use a proxy server for your LAN. Figure 2: LAN Settings 2 Please consult a network administrator if you cannot perform such configuration. EchoView - Wireless Video Adapter Manual Version 0.3 6 For Firefox users: 1. Launch Mozilla Firefox. 2. Click Tools from the menu bar and click Options. 3. Click Connection Settings… in General Options. 4. In Connection Settings dialog window (figure 3), select Direct connection to the Internet and click OK. Figure 3: Firefox Connection Settings 2.3 Connecting Wireless Video Adapter You can connect Addlogix wireless video adapter to a display monitor that supports DVI or VGA input. The display monitor will be ready to show video wirelessly. 1. Connect the wireless video adapter to a display monitor’s DVI3 or VGA input port. 2. Connect the included power adapter. The included power adapter is optional if the display monitor’s DVI port supplies power4. 3. When the Addlogix splash screen (figure 3) is shown on the display monitor, the wireless video adapter is properly powered, connected and ready to use. Figure 4: Addlogix Splash Screen 3 Adapter (not included) is required to connect a DVI-D or DVI-A display monitor. 4 Please refer to owner’s manual of the display monitor. Addlogix wireless video adapter is not guaranteed to work with every display monitor that uses a DVI-I connector for video output. EchoView - Wireless Video Adapter Manual Version 0.3 7 3 Software Installation 3.1 Installing for the First Time All software files are stored in Addlogix wireless video adapter. Installation process takes place wirelessly between your PC and the adapter. No CD is required. Connecting Wireless Network 1. Click Start and then click Control Panel. 2. Double-click on Network Connections, right-click on wireless network connection and then click View Available Wireless Networks. 3. In the Wireless Network Connection dialog window, click to select the wireless network that’s shown on the splash screen matching the SSID (i.e. AddLogix-XX) in the top right corner and click Connect5. 4. Close the Wireless Network Connection dialog window when the wireless network status for AddLogix-XXXX is shown connected. Automatic Download and Installation 1. Disconnect Ethernet (network) cable from your PC and launch the default Internet browser used by the computer. 2. The driver installation process will automatically begin. 3. During the installation, two Hardware Installation dialog windows will appear to notify that the drivers being installed have not passed Windows certification. These are normal activities and do not mean that there’s a problem with your PC. Click Continue Anyway button to continue with the installation. The PC screen will flicker temporarily for testing purposes after each message prompt. 4. When the installation process is completed, please reboot the computer. CD-ROM Installation 1. Insert the driver CD to an optical drive. 2. The driver installation process will automatically begin. 3. During the installation, two Hardware Installation dialog windows will appear to notify that the drivers being installed have not passed Windows certification. These are normal activities and do not mean that there’s a problem with your PC. Click Continue Anyway button to continue with the installation. The PC screen will flicker temporarily for testing purposes after each message prompt. 4. When the installation process is completed, please reboot the computer. 3.2 Updating Software When Addlogix wireless video adapter’s firmware is upgraded (see Section 4, Upgrade Firmware), please uninstall the current wireless video adapter’s software that is in your PC and follow the steps in Installing for the First Time to update your PC ...