Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
4. It is recommended that beginners use the Quick Setup option. It will lead you step by step to configure the Wireless Router. Quick Setup In the main web page, select Quick Setup to specify the Time Zone, Wireless Settings, and WAN connection type. 16 1-1 Time Zone Select your time zone. You can also configure the optional Daylight Saving time. Click Next to go the next page. 1-2 Wireless Settings Set the desired SSID, Country (Domain Regulatory), Channel, and WEP Settings of the Wireless Router and click Next. Note: your wireless adapter must be set to the same settings in order for there to be proper wireless connection. 1-3 WAN Connection Type Select the applicable WAN connection type that your Internet Service Provider (ISP) is using. If you are not sure which WAN connection type your ISP is using, please contact your ISP for assistance. 17 1-3-1 Dynamic IP (Cable modem) [DHCP] The Host Name is optional but may be required by some ISPs. The default MAC address is set to the WAN's physical interface on the Broadband Router. If the ISP requires a host name, click Clone MAC Address to copy the MAC address of the PC’s network card. It will replace the WAN MAC address with the network card’s MAC address. Click Next to go to the next page. 1-3-2 Static IP (Fixed-IP xDSL) If your ISP assigns a fixed IP address, choose this option and enter the assigned IP address, Subnet Mask, and ISP Gateway Address provided by your ISP. Click Next to go to the next page. 18 1-3-3 PPPoE (Dial-Up xDSL) If you have to supply a user name and password to connect to the Internet, choose this option. Enter your user name and password in the appropriate fields. If your ISP provided a Service Name, enter it in the Service Name field, otherwise, leave it blank. The fields in the Service Name, IP Address, and DNS Address must be filled up when the ISP provides these information to you. If the ISP uses Dynamic IP Address, then you can skip these fields. The MTU specifies the largest packet size permitted for network transmission. Enter the value desired. For most DSL users, it is recommended to use the default value of 1492. The Maximum Idle Time determines the maximum idle time allowed before a connection is dropped (default time=0, always connected). Connect-on-demand allows you to make a connection automatically when there is a need for connection. Click Next to go to the next page. 19 1-3-4 PPTP If you are using PPTP to connect to the Internet, select this option. Enter the PPTP Account Name, PPTP Password, Host Name, Service IP Address, Your IP Address, and Your Subnet Mask. If your ISP provided you with a Connection ID, enter it in the Connection ID field, otherwise, leave it as zero. The MTU specifies the largest packet size permitted for network transmission. Enter the value desired. For most PPTP users, it is recommended to use the default value of 1460. The Maximum Idle Time determines the maximum idle time allowed before a connection is dropped (default time=0, always connected). Connect-on-demand allows you to make a connection automatically when there is a need for connection. Click Next to go to the next page. 1-4 DNS If your ISP provided at least one DNS Server IP Address, type that IP Address in the Primary DNS address field. You can enter another DNS Server IP Address in the Secondary DNS address field. The Router will use these addresses for quicker access to the DNS Servers. If your ISP did not provide you with any DNS server address, just leave the fields blank. Click Finish to complete the setup. 20 21 Advanced Setup The Broadband Router supports advanced functions like System setting, WAN setting, LAN setting, WLAN setting, NAT Setting, and Firewall setting. 2-1 System This page includes all the basic configuration tools for the Broadband Router. Click on the selections at the left side of the menu screen. 2-1-1 System Time Connecting to a Simple Network Time Protocol (SNTP) server allows the Broadband Router to synchronize its system clock with the global Internet through the SNTP server. The system clock in the Broadband Router is used to record the system log and control client filtering. 22 2-1-2 Administrator Settings • Password Settings Set a password to restrict management access to the Broadband Router. · Remote Management from Internet To manage the Broadband Router from a remote location (outside of the local network through WAN port), check the Enable box and specify the IP address of the remote PC. Leaving the IP address 0.0.0.0 will allow all public IP addresses to access the router. 2-1-3 Firmware Upgrade After you have downloaded a new firmware to your computer, enter/browse to the path of the upgrade file and click APPLY. You will be prompted to confirm the upgrade. While updating the firmware, please wait after clicking the APPLY button, and follow the instructions on the screen. The System Light on 23 the front panel will start to blink when the firmware upgraded successfully. 2-1-4 Configuratio...
Эта инструкция также подходит к моделям:Сетевое оборудование - ARW027 (1.53 mb)
Сетевое оборудование - ARW027 (1.53 mb)
Сетевое оборудование - ARW027 (1.53 mb)