Оценок - 0, средний балл: 4
(
)
)
|
Фрагмент инструкции
© Copyright AirLink Communications, Inc, 1993-2004. All rights reserved. Please send comments to: email: pubs@AirLink.com Fax: 510-264-5422 Phone: 510-264-5400 Post: AirLink Communications, Inc. Attention: Technical Publications Dept. 3159 Corporate Place Hayward, CA 94545 Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the AirLink Communications modem are used in a normal manner with a well-constructed network, the AirLink modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. AirLink Communications, Inc., accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the AirLink Communications modem, or for failure of the AirLink Communications modem to transmit or receive such data. Safety and Hazards Do not operate the AirLink Communications modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the AirLink Communications modem MUST BE POWERED OFF. The AirLink Communications modem can transmit signals that could interfere with this equipment. Do not operate the AirLink Communications modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the AirLink Communications modem MUST BE POWERED OFF. When operating, the AirLink Communications modem can transmit signals that could interfere with various onboard systems. The driver or operator of any vehicle should not operate the AirLink Communications modem while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitation of Liability The information in this manual is subject to change without notice and does not represent a commitment on the part of AirLink Communications, Inc. AIRLINK COMMUNICATIONS, INC. SPECIFICALLY DISCLAIMS LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY AIRLINK COMMUNICATIONS, INC. PRODUCT, EVEN IF AIRLINK COMMUNICATIONS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Raven and PinPoint CDMA User Guide Table of Contents 1 Introduction..........................................................................................1 1.1 CDMA2000 1X.................................................................................................1 1.2 Raven Product Overview.................................................................................2 1.3 PinPoint Product Overview.............................................................................2 2 Network Connection............................................................................3 2.1 Internet (TCP/IP) Connections via 1xRTT.....................................................3 2.2 Data Connections.............................................................................................3 3 Modem Configuration..........................................................................5 3.1 Local Configuration.........................................................................................5 3.2 Modem Activation............................................................................................7 3.3 Remote Configuration......................................................................................9 4 Windows Dial-Up Networking Setup.............................................12 4.1 Add Windows Modem Driver........................................................................12 4.1.1 Setup Modem 12 4.1.2 Add Modem Driver 12 4.2 Windows Dial-Up Networking (PPP) Configuration...................................15 4.3 Making a 1xRTT Data Connection...............................................................23 5 Dynamic IP Addresses.......................................................................25 5.1 IPManager and Dynamic DNS Updates.......................................................26 5.2 Using Names in the Modem, Domain Name Resolving...............................26 6 Serial Communication Modes..........................................................28 6.1 AT Mode.........................................................................