Оценок - 3, средний балл: 3.7 ( )

Производитель: ADTRAN Размер: 3.76 mb Название файла: c3b8a554-6455-b5f4-6d07-3ea881a070a1.pdf Язык инструкции:

Syntax Description Specifies the source interface (in the format type slot/port). Type ip radius source-interface ? for a complete list of interfaces. Default Values By default, no source interface is defined. Applicable Platforms This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series units. Command History Release 5.1 Command was introduced. Functional Notes If this value is not defined, the address of the source network interface is used. Usage Examples The following example configures the Ethernet 0/1 port to be the source interface: (config)#ip radius source-interface ethernet 0/1 61200510L1-35E Copyright © 2005 ADTRAN Command Reference Guide Global Configuration Mode Command Set ip route Use the ip route command to add a static route to the route table. This command can be used to add a default route by entering ip route 0.0.0.0 0.0.0.0 and specifying the interface or IP address. Use the no form of this command to remove a configured static route. Syntax Description Specifies the network address (in dotted decimal notation) to add to the route table. Specifies the subnet mask (in dotted decimal notation) associated with the listed network IP address. Specifies the gateway peer IP address (in dotted decimal notation) or a configured interface in the unit. Use the ip route interface ? command to display a complete list of interfaces. Specifies an administrative distance associated with a particular router used to determine the best route when multiple routes to the same destination exist. The smaller the administrative distance the more reliable the route. (Range is 1 to 255.) Default Values By default, there are no configured routes in the route table. Applicable Platforms This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series units. Command History Release 1.1 Command was introduced. Release 9.1 Tunnel added as a supported interface. Release 11.1 Demand added as a supported interface. Usage Examples The following example adds a static route to the 10.220.0.0/16 network through the next-hop router 192.22.45.254 and a default route to 175.44.2.10: (config)#ip route 10.220.0.0 255.255.0.0 192.22.45.254 (config)#ip route 0.0.0.0 0.0.0.0 175.44.2.10 61200510L1-35E Copyright © 2005 ADTRAN Command Reference Guide Global Configuration Mode Command Set ip routing Use the ip routing command to enable the AOS IP routing functionality. Use the no form of this command to disable IP routing. Syntax Description No subcommands. Default Values By default, IP routing is enabled. Applicable Platforms This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series units. Command History Release 1.1 Command was introduced. Usage Examples The following example enables the AOS IP routing functionality: (config)#ip routing 61200510L1-35E Copyright © 2005 ADTRAN Command Reference Guide Global Configuration Mode Command Set ip scp server Use the ip scp server to enable the secure copy (SCP) server. SCP is a more secure form of the older Berkley r-tool RCP or remote copy. It allows an SCP client to send or receive files to/from the unit. SCP relies on Secure Shell (SSH) for authentication and encryption of the data transfer. Syntax Description No subcommands. Default Values By default, the secure copy server is disabled. Applicable Platforms This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series units. Command History Release 10.1 Command was introduced. Usage Examples The following example enables the secure copy server: (config)#ip scp server 61200510L1-35E Copyright © 2005 ADTRAN Command Reference Guide Global Configuration Mode Command Set ip snmp agent Use the ip snmp agent command to enable the Simple Network Management Protocol (SNMP) agent. Syntax Description No subcommands. Default Values By default, the SNMP agent is disabled. Applicable Platforms This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900 Series units. Command History Release 1.1 Command was introduced. Functional Notes Allows a MIB browser to access standard MIBs within the product. This also allows the product to send traps to a trap management station. Usage Examples The following example enables the IP SNMP agent: (config)#ip snmp agent 61200510L1-35E Copyright © 2005 ADTRAN Command Reference Guide Global Configuration Mode Command Set ip sntp source-interface The ip sntp source-interface command to use the specified interface’s IP address as the source IP address for SNTP traffic transmitted by the unit. Use the no form of this command if you do not wish to override the normal source IP address. Syntax Description Spec...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: