Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
This secure, theft-deterrent solution keeps your locations on-line with the benefit of wireless broadband internet access. EASY INSTALL Install and use your MC100E in four easy steps: 1) Activate your MC100E EVDO wireless broadband data plan 2) Plug the MC100E modem into a compatible CradlePoint product 3) Update your CradlePoint product firmware (if needed) 4) Fine tune the MC100E location for optimal 3G/EVDO signal strength 2 ACTIVATE YOUR MODEM A wireless broadband data plan must be activated on your MC100E modem. The process of initiating a carrier plan with your modem is called Activation. Wireless broadband data plans are made available from wireless carriers, such as Sprint and Verizon, and are required to allow your modem to connect and transfer data on their network. Your modem may already be activated. Check with your vendor for status and follow their advice, if needed. If your modem is not yet active or your vendor is unable to activate the modem, go to for more information. for full technical support, register your product: for additional information, visit: 3 HOW TO INSTALL YOUR MODEM The MC100E is designed to be used exclusively with compatible CradlePoint routers and adapters. For a complete list of compatible products, visit The MC100E is a plug-and-play device. Simply attach the modem to the CradlePoint product and connect. The modem will connect if 3G/EVDO or 1xRTT technology is available in your area. 1) Turn the compatible CradlePoint product OFF. 2) Align the MC100E USB plug with the appropriate USB port on the CradlePoint router or adapter. 3) Connect the MC100E to the CradlePoint product, pressing on both the MC100E and the product. 4) Turn the CradlePoint product ON with the MC100E attached. Watch for the USB #2 modem LED to illuminate on the router or adapter. With 3G/EVDO signal coverage, you’re now ready to access the internet! © 2011 CradlePoint, Inc. All rights reserved. CradlePoint is not responsible for omissions or errors in typography or photography. CradlePoint, WiPipe™, and the WiPipe logo are trademarks of CradlePoint, Inc. in the US and other countries. Other trademarks are property of their respective owners. 170550-000 4 UPDATING ROUTER or ADAPTER FIRMWARE WARRANTY INFORMATION REGULATORY STATEMENTS IMPORTANT NOTE: CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT You may need to update your CradlePoint router or adapter firmware to support FCC RADIATION EXPOSURE STATEMENT purchase (or the first purchaser in the case of resale by an authorized distributor) for a period of one the MC100E modem. To update your product, follow the steps below. This equipment has been tested and found to comply with the limits for a Class B (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, This equipment compiles with FCC radiation exposure limits set forth for an uncontrolled environment. digital device, pursuant to Part 15 of the FCC Rules. These limits are designed at CradlePoint’s discretion. This equipment should be installed and operated with minimum distance 20cm between the radiator to provide reasonable protection against harmful interference in a residential HOW TO DOWNLOAD FIRMWARE and your body. installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed Within thirty (30) days of receipt should the product fail for any reason other than damage due to 1)Navigate to CradlePoint’s support page and used in accordance with the instructions, may cause harmful interference to radio communications. customer negligence, purchaser may return the product to the point of purchase for a full refund of This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2)Select your product from the list and download the most recent firmware file to your desktop. However, there is no guarantee that interference will not occur in a particular installation. If this equip- the purchase price. ment does cause harmful interference to radio or television reception, which can be determined Due to the essentially high output power nature of WiMAX device, use of this device with other trans- by turning the equipment off and on, the user is encouraged to try and correct the interference by one HOW TO UPDATE FIRMWARE (when connected to a CBA750) If the purchaser wishes to upgrade or convert to another CradlePoint, Inc. product within the thirty (30) mitters at the same time may exceed the FCC RF exposure limit and such usage must be prohibited or more of the following measures: 1)Connect your computer to the CradlePoint adapter with an Ethernet cable. day period, purchaser may return the product and apply the full purchase ...