Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions found herein, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his expense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment. 400-0520-001 2 DESIGNER SOLUTIONS ABOUT YOUR SP107-101 2 TECHNICAL SPECIFICATIONS 3 SP107-101 Surface Mount AV Interconnect Plate The SP107-101 is designed for use in a table, podium, or other piece of furniture and is part of the many interconnection solutions offered by ALTINEX. It provides a means of connecting a laptop or other audiovisual equipment on the surface to a presentation system below the furniture or in another room. The SP107-101 offers interconnections for the most frequently used presentation inputs. · AC power · Computer audio and video · Network and USB Female receptacles for power and computer signals are provided in the panel. The AC power cable is permanently attached to the SP107-101 and has a cord length of 10 ft (3 m). Short adapter cables are preinstalled at the factory for computer audio, HDMI, S-Video, USB, and network connections for ease of installation. Bulkhead connectors are provided for computer video, composite video, and left and right audio. Six foot extension cables are provided for all signal connections. The SP107-101C is customizable and allows different connector types to be selected at the time of purchase. The AC receptacle and circuit breaker are fixed, but the other connectors can be replaced with other video, audio, and communication type connectors. For example, the 15-pin HD computer video input connector can be replaced with a 9-pin D-sub connector for serial communication. There are several options available for use in the network location. See the ALTINEX website for a complete list of available connector types including: RCA jacks, LED indicators, 4-pin Mini-DINs, etc. Specifications are subject to change. See for up-to-date information. FEATURES/ DESCRIPTION SP107-101 PASS-THROUGH AC Power 10 ft (3 m) 110 VAC, 60 Hz, 5 A NEMA F-M Audio, Video, USB, and Network 8 in (203 mm) Computer Audio 3.5mm F-F (1) Digital Video HDMI F-F (1) S-Video 4-pin Mini DIN F-F (1) USB Type-A F-F (1) Network RJ-45 F-F (1) Bulkhead Connector Computer Video 15-pin HD F-F (1) Composite Video RCA F-F (1) Left & Right Audio RCA F-F (2) Accessories Included Extension cables 6 ft (2 m) • VGA, M-M • S-Video, M-M • RCA x3 (V, L, R), M-M • CAT-5, M-M • HDMI, M-M • USB Type-A, M-M • Audio 3.5mm, M-M Miscellaneous Hardware • Mountings brackets • Mounting screws Table 1. SP107-101 Description 400-0520-001 3 DESIGNER SOLUTIONS MECHANICAL SP107-101 Max. Table Thickness 3.0 in (76 mm) Width 6.4 in (163 mm) Depth 4.4 in (112 mm) Height (from surface down, not including cables) 3.0 in (76 mm) Net Weight SP107-101 2.4 lb (1.1 kg) Net Weight Extension Cables 2.2 lb (1.0 kg) Shipping Weight (approx.) 6.1 lb (2.8 kg) Material 0.062 in Aluminum Finish Black paint, Fine texture T° Operating (T° Max) 10°C-35°C (40°C) Humidity 90% non-condensing ELECTRICAL SP107-101 Power Rating (pass-through AC power) 120VAC, 60Hz, 15A Table 3. SP107-101 Electrical Table 2. SP107-101 Mechanical 400-0520-001 4 PRODUCT DESCRIPTION 4 PRODUCT DESCRIPTION 4 DESIGNER SOLUTIONS 400-0520-001 5 DESIGNER SOLUTIONS APPLICATION DIAGRAMS 5 DIAGRAM 1: CUTOUT DIMENSIONS 400-0520-001 6 DESIGNER SOLUTIONS DIAGRAM 2: DIMENSIONS 400-0520-001 7 DESIGNER SOLUTIONS DIAGRAM 3: SP107-101 INSTALLATION 400-0520-001 8 DESIGNER SOLUTIONS INSTALLING YOUR SP107-101/101C 6 TROUBLESHOOTING GUIDE 8 Step 1. Cut an opening into the furniture’s surface. Note: The furniture can be 3” or less in thickness. Always confirm dimensions before cutting to insure that specifications have not changed. Step 2. Insert the SP107-101/101C into the table cutout. Step 3. Refer to Diagram 3 and from underneath the furniture surface, attach the mounting brackets to the 6-32 studs on the bottom side of the SP107-101/101C using the screws provided. NOTE: If the surface is too thick for the screws provided, longer 6-32 screws can be used. Step 4. Secure the audio/video cables by using cable clamps, tie wraps, or other standard mounting hardware. Pass the power cord from the bottom of the housing and attach it to the furniture separately from the audio/video cables. Step 5. Connect the appropriate cables with the correct input connectors on the bottom of the unit. Step 6. The SP107-101/101C is now operational. OPERATION 7 The SP107-101/101C requires no adjustments for performance. Once set-up, the SP107-101/101C will work trouble-free without user intervention. Connect external devices to the appropriate connector on the SP107-101/101C. The SP10...