Оценок - , средний балл:
(
)
)
Производитель: Altinex
Размер: 1.19 mb
Название файла: 5efaa583-3481-42b6-b169-cf8c2c3dd3b3.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Its ID was set to 1 since it is the first card installed in the system, reading from left to right. Send the command [RSNC1] to find the slot number of this card. The system responds with the following feedback: [4] 400-0095-005 17 MULTITASKER™ 41. [HELP] This command displays information available for the MultiTasker interface commands. Command Format: [HELPCnUi] Cn = card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Display the RS-232 commands available for the MT109-100 card in slot 4 be sending [HELPC4]. The commands along with a brief description will be displayed in the Terminal Window. GROUP COMMANDS The next few commands are group commands. The use of groups allows several boards, with the same functions, to be controlled simultaneously with a single command. These commands apply to all cards, not only the MT109-100. 42. [WR] This command groups multiple cards in the enclosure allowing all the group members to be controlled simultaneously with the same command. Each MultiTasker unit may define a maximum of eight groups. In systems with audio and video cards, the cards are typically grouped as follows: Group 1 = Video Cards Group 2 = Audio Cards Group 3 = Video and Audio Cards Command Format: [WRCn1Cn2…GkUi] Cn = Card ID (n = slot # from 1 to max slots) Gk = Group number (k = # from 1-8) Ui = Unit ID (i = # from 0-9) Example: Group cards 2, 4, and 6 as Group 5 of Unit ID 1 by sending [WRC2C4C6G5U1]. After executing this command, cards 2, 4 and 6 will be grouped together as Group 5 of Unit ID 1. The system will return the following feedback: [G5=C2C4C6] Now, when a command is sent to G5, each board in G5 will execute the same command. 43. [RMC] This command may be used to remove one or more group members from a group. Reset the system after using this command for all changes to take effect. Command Format: [RMCn1Cn2…GkUi] Cn = Card ID (n= # from 1 to max slots) Gk = Group ID (k = # from 1-8) Ui = Unit ID (i = # from 0-9) Example: Group 5 consists of the cards located in slots numbered 2, 4, and 6. Remove just cards 4 and 6 from the group by sending the command [RMC4C6G1]. The system will return the following feedback: [G5=C2] 44. [RMG] This command may be used to delete an entire group, or all groups. REMOVE A GROUP Remove all the members from the group, effectively deleting the group. Command Format: [RMGkUi] Gk = Group ID (k = # from 1-8) Ui = Unit ID (i = # from 0-9) Example: Group 5 consists of the cards located in slots number 2, 4 and 6. Remove all cards from the group by sending the command [RMG5]. The system will return the following feedback: [G5=0] REMOVE ALL GROUPS Remove all the members from every group, effectively deleting all groups. Command Format: [RMG*Ui] Ui = Unit ID (i = # from 0-9) 400-0095-005 18 MULTITASKER™ Example: Group 5 consists of cards 2, 4 and 6. Group 2 consists of cards 1, 2, 3, 4 and 5. Delete all the groups by sending the command [RMG*]. The system will return the following feedback: G1-G8:EMPTY 45. [RD] This command reads and then displays the members in each group. Command Format: [RDGkUi] Gk = Group ID (k = # from 1-8) Ui = Unit ID (i = # from 0-9) Example: The cards in slots 2, 4 and 6 are part of Group 5. Read the member data for Group 5, by sending the command [RDG5]. The system will return feedback as follows: [G5=C2C4C6] The feedback shows G5 (Group 5) and then the cards that make up Group 5. In this case, Group 5 includes C2, C4 and C6. 7.3. SUMMARY OF COMMANDS Card Commands 1) [VER] Display software version 2) [C] Display card status 3) [CnS] Save card settings 4) [?] Display system cards 5) [?C] Display card information 6) [STA1] Enable auto feedback 7) [STA0] Disable auto feedback 8) [ +O ] Increment output volume 9) [ -O ] Decrement output volume 10) [ +I ] Increment input gain 11) [ -I ] Decrement input gain 12) [ + ] Increment value by one 13) [ -] Decrement value by one 14) [SEL] Select input level to adjust [SELm] Select output volume to adjust 15) [VLO] Set output volume level 16) [VLI] Set an input level 17) [RUP] Ramp volume UP to 32 18) [RUP=] Ramp volume UP to a value 19) [RDN] Ramp volume DOWN to 1 20) [RDN=] Ramp volume DOWN to a value 21) [RAMP] Return ramp rate 22) [RAMP=] Set ramp rate 23) [RST] Stop ramping 24) [CLR] Reset card to default values 25) [ONm] Select the active input 26) [ON] Enable output 27) [OFF] Disable output 28) [MUT0] Enable output 29) [MUT1] Disable output 30) […S] Save command configuration 31) […F] Display feedback upon sending 32) […P] Set the path, preload for [SW] 33) [SW] Switch preloaded output buffer 34) [TEST] Perform board memory test 35) [FBD] Enable/disable feedback delay 36) [RSI] Reset Card IDs to defaults 37) [SIDn] Set all Card IDs 38) [SIDnCi] Set one Card ID 39) [SID+] Set all Card IDs to an offset 40) [RSN] Display card slot number 41) [HELP] Display available commands 400-0095-005 19 MULTITASKER™ Group Commands 42) [WR] Group cards 43) [RMC] Remove member(s) from group 44)...