Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
Read and understand this Owner’s Manual before operating the water pump. If a problem should arise, or if you have any questions about your water pump, consult an authorized Honda water pump dealer. HONDA MOTOR CO., LTD. 1990, ALL RIGHTS RESERVED CONTENTS 1. SAFETY INFORMATION ....................................................... 3 2. CbMPONENT IDENTIFICATION ............................................. 5 3. PRE-OPERATION CHECK . ..r .................................................. 6 4. STARTING THE ENGINE ....................................................... 12 5. OPERATION ....................................................................... 14 High altitude operation ..................................................... 15 6. STOPPING THE ENGINE ....................................................... 16 7. MAINTENANCE .................................................................. 17 8. TRANSPORTING/STORAGE .................................................. 25 9. TROUBLESHOOTING ................. .‘......................................... 27 10. SPECIFICATIONS ................................................................ 29 1 1. WARRANTY SERVICE .......................................................... 30 1. SAFETY INFORMATION Read these labels before you operate the water pump. m To ensure safe operation- For safety, never pump flammable or corrosive liquids such as gasoline or acid. Also, to avoid pump corrosion, never pump sea water, muddy water, chemical solutions, or caustic liquids such as used oil, wine, or milk. Place the pump on a firm, level surface. If the pump is tilted or overturn- ed, fuel spillage may result. To prevent fire hazards and to provide adequate ventilation, keep the pump at least 1 meter (3 feet) away from buildings and other equipment during operation. Do not place flammable objects close to the pump. A spark arrester is available as an optional part for this pump. It is illegal in some areas to operate an engine without a spark arrester. Check local laws and regulations before operating. Know how to stop the pump quickly, and understand the operation of all controls. Never permit anyone to operate the pump without proper instructions. Do not allow children to operate the pump. Keep children and pets away from the area of operation. Gasoline is extremely flammable and is explosive under certain condi- tions. Do not smoke or allow flames or sparks where the pump is refuel- ed or where gasoline is stored. Refuel in a well-ventilated area with the engine stopped. Do not overfill the tank. Make sure that the filler cap is closed securely. Exhaust gas contains poisonous carbon monoxide. Avoid inhalation of exhaust gasses. Never run the pump in a closed garage or confined area. The muffler becomes very hot during operation and remains hot for a while after stopping the engine. Be careful not to touch the muffler while it is hot. Let the engine cool before storing the pump indoors. 2. COMPONENT IDENTIFICATION PRlMiNG WATER CAP FILLER CAP \ CHOKE LEVER AIR CLEANER MUFFLER THROTTLE LEVER *FRAME SERIAL NUMBER PUMP DRAIN PLUG DISCHARGE SPURT FUEL VALVE ENGINE SWITCH STARTER GRIP ~&RF CAP’ *ENGINE SERIAL NUMBER’ Record the frame and engine serial numbers for 1 our reference. Refer to the serial numbers when ordering parts, and when making technical or warranty inquiries (see page 30). Frame serial number: Engine serial number: 3. PRE-OPERATION CHECK 1. Suction hose (commercially available) Use a reinforced-wall or wire braided hose to prevent suction collapse. Since the pump’s self-priming time is directly proportional to hose length, a short hose is recommended. Secure the hose with the hose band. 1 IMPORTANT NoT’CE 1 Always install the strainer on the end of the suction hose before pumping. Graiel or debris sucked into the pump will cause serious impeller damage. STRAINER (optional parts) 2. 2.2. Discharge DischargeDischarge hose hosehose (commercially (commercially(commercially available) available)available) When using a fabric hose, always use a hose band to prevent the hose from disconnecting under high pressure. NOTE: A short, large-diameter hose will provide lower fluid friction and improve efficiency. HOSE‘BAND (optional parts1 3. Engine Oil ( IMPORTANT NOTICE 1 Running the engine with low oil level will cause serious engine damage. 1. Place the water pump on a level serface. 2. Remove the oil filler cap/dipstick and wipe it clean. 3. Check the oil level by inserting the dipstick in the filler neck without screwing it in. 4. If the level is low, fill to the top of the oil filler neck with the recom- mended oil. Use high-detergent, premium quality 4-stroke engine oil, certified to meet or exceed U.S. automobile manufacturer’s requirements for API Service Classification SG, SF/CC, CD. ( IMPORTANT NOTICE ] u sing nondetergent oil or 2-stroke engine oil could shorten the engine’s service life. SAE 1 OW-30 ,is recommended for general, all-temperature use. Other viscos...
Эта инструкция также подходит к моделям:Сантехника - WB30T (939.79 kb)