Войти:
Оценок - 5, средний балл: 3.6 ( )

Инструкция по эксплуатации Axor, модель ShowerArc 26396001

Производитель: Axor
Размер: 4.86 mb
Название файла: hruh0109.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


This diagram shows both possible positions for the installation. Installation in 90. corner Only one set of supplies is required – do not install two sets of supplies. Installation in 90. Corner Seal the wall around the supplies with waterproof sealant. Failure to seal the wall can lead to possible water damage. 1 2 3 4 5 6 7 8 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. 9 10 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. Be careful not to drill into water lines! 11 12 6 mm 14 13 15 16 17 18 19 20 1 2 6 mm 21 22 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. 24 23 2 1 6 mm 26 25 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. Turn to page 22 to continue the installation. Wall-to-Wall Installation Only one set of supplies is required – do not install two sets of supplies. The thermostatic mixing valve may be installed on either wall. The diagram shows both possible positions for the installation. Wall-to-Wall Installation Seal the wall around the supplies with waterproof sealant. Failure to seal the wall can lead to possible water damage. 1 2 3 4 5 6 7 8 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. 9 10 11 12 2 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. Be careful not to drill into water lines! 6 mm 1 13 14 Install the 26397000 mounting set 16 15 17 18 XX90XX= 20 19 22 21 1 2 6 mm SW 3 mmM6x8 24 23 M6x601.2.3. SW 3 mmM6x8 25 26 Install the 26397000 mounting set 27 28 2 Seal the wall around the anchors with waterproof sealant. Failure to seal the wall can lead to possible water damage. 1 6 mm Turn to page 22 to continue the installation. SW 3 mmM6x8 29 Install the Cover, Escutcheon, and Handle 2 1 Install the Showerhead and Handshower Reset the High Temperature Limit Stop Loosen the handle screw with a 3 mm Allen wrench. Remove the retainer clip and stop ring from the stem. Turn the stop unit to the handshower position. Turn the temperature control stem until the output water is the desired high temperature -- usually 110.. 1 2 KLICK 3 4 Turn the stop unit to the off position. Install the stop ring so that the tooth is against the stop. Install the clip. Install the handle. Tighten the handle screw with a 3 mm Allen wrench. KLICK 5 6 SW 3 mm 7 Justify the Handle Turn the diverter handle to the handshower position. Turn the temperature control knob until the output water is 100.F. Turn the diverter handle to the off position. Loosen the handle screw with a 3 mm Allen wrench. Remove the handle. Align the indexing mark on the temperature control knob with the 100. mark. Replace the handle. Tighten the handle screw. 1 2 3 4 User Instructions Turn the temperature control knob to change the temperature. Turn it clockwise to make the water cooler, counter-clockwise to make the water warmer. When the knob is turned counter-clockwise to the 100. position it will stop. To obtain water hotter than 100., push the knob in, and continue turning it counter-clockwise. Turn the diverter handle to select the handshower, bodysprays, or showerhead. If the indicator on the handle is positioned between the showerhead and bodyspray positions, water will come from both. Using the Handshower Turn the function lever to until the desired spray mode has been obtained. function lever Cleaning the Handshower The handshower uses the Rubit™ cleaning system. If scale deposits are noticed in the spray channels, rub across the channels with a finger or a sponge to dislodge them. If necessary, pour about 3/4” of a commercial scale remover, such as Lime-Away or CLR, into a shallow dish. Soak the s...

Эта инструкция также подходит к моделям:
Сантехника - ShowerArc 26396001 (4.86 mb)
Сантехника - ShowerArc 26396001 (4.86 mb)
Сантехника - ShowerArc 26396001 (4.86 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории