Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
(attention for minimum room height of 87 from tub-floor) Flush through the supply pipes. SW 0 mm SW mm O 0 mm O8 mm SW 24 mm 1 2 1. 2. 1. 2. Wall Installation 3 4 SW 13 mm SW 2 mm Wall Installation Adjustment Thermostatic mixer please see page 14 Fitting Items / Water Connections Overview Corner Installation 0 2x 2x 2x1x Seal all drill holes with silicone free from acetic acid (not in scope of delivery) Fitting items / water connections corner installation Before drilling the bottom holes pay attention if hot and/or cold water supply pipes cross this area. In this case, only drill on the side without any supply pipes. Dimensions The installation dimensions stated in this installation instructions are ideal for people of approximately 70" in body height. The dimensions can be altered if required. In this case you will have to attend to the minimum height of 87" from shower tray floor, and alter all the required measurements as necessary. If the height of water connection are outside of the illustrated range, the drill measures have been adjusted accordingly. (attention for minimum room height of 87 from tub-floor) Flush through the supply pipes. SW 5 mm O mm SW 0 mm O mm SW mm 11 1 2 3 Corner Installation 12 4 5 SW 24 mm 1. 2. 1. 2. Corner Installation 13 6 7 SW 13 mm SW 17 mm Corner Installation Adjustment Thermostatic mixer please see page 14 14 A 1 2 3 4 5 6 7 Thermostat Setting / Safety Function Thermostat Setting (6-7) - Set Quattrostat to "Hand shower". - Open Quattrostat, adjust thermostat to 100 °F. - Push thermostat grip on and align vertically (red button A points upwards), screw tight Safety Function (1-5) The desired maximum temperature for example max. 108 °F can be pre-set thanks to the safety function 15 8" (150 N) Trouble Shooting Fault Cause Remedy water level is too low filter in angled hose connection is dirt clean filter handshower delivering insufficient water filter of handshower dirty clean filter temperature regulation not possible (only hot thermostatic cartridge defective exchange thermostatic cartridge or cold water) at new installation: connection hose exchanged install connection hose correct shower is dripping cartridge of Quattrostat defective exchange cartridge cartridge of Quattrostat stiff nut of cartridge screwed to tight first screw nut of cartridge tight, than loosen the nut approx. 12° English Exchanging lateral shower head 17 7 8 1 6 4 2 5 3 13 11 12 23 x 2 25 x 2 29 x 2,5 9 10 14 15 18 17 16 Spare Parts Pos. Description Nr./No./Nr. VE XXX = Colors 000 chrome plated 810 satinox 880 satin chrome 1 head shower 97195XX1 1 shower arm 97196XXX 1 2 handshower 98552XX1 1 3 handle for thermostat 38391XX1 1 sleeve 95032XXX 1 4 handle 10490XXX 1 flange 97057XXX 1 5 hose 25941XXX 1 6 body shower 97197001 1 escutcheon 97198XXX 1 spray head 28408XXX 1 7 cartridge on/off control 96645000 1 8 thermostat cartridge 94282000 1 sealing set 95037000 1 9 shelf 97199000 1 10 upper cover 97200XXX 1 11 lower cover 97201XXX 1 12 connetion hose 900 mm 97202000 1 13 mounting kit 97203001 1 14 handle with showerholder 98579XXX 1 15 gas spring 98611000 1 16 elbow NPT ." 97582000 1 17 sliding roller 98890000 1 18 corner fitting set 2621X000 1 Cleaning Instruction English Cleaning Recommendation for Hansgrohe Products Modern sanitary tapware, kitchen mixers and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and reclamations, it is...
Эта инструкция также подходит к моделям:Сантехника - Pharo DP Lift 2 M 20 (2.32 mb)
Сантехника - Pharo DP Lift 2 M 20 (2.32 mb)
Сантехника - Pharo DP Lift 2 M 20 (2.32 mb)