Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Use the list that is for your Overseeder as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware. Tools Required: • Safety glasses • Work gloves • Pencil • Tape Measure • Center punch • Hammer • Electric drill with 21/32" drill bit • Extension cord (if required) • Set of wrenches • 3/8" or 1/2" ratchet wrench set Further Assistance Your dealer wants you to be satisfied with your new seeder. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested: 1. Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you. 2. If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance. 3. For further assistance write to: Land Pride Service Department 1525 East North Street P.O. Box 5060 Salina, Ks. 67402-5060 E-mail address lpservicedept@landpride.com © Copyright 2005 Printed11/09/05 Manual No. 308-305M 2 Manual No. 308-305M 11/09/05 Assembly Instructions Assembly Instructions Refer to Figure 1: 1. Locate and drill two 21/32" front roller mounting holes in the location shown. Refer to Figure 2: 2. Attach floating top link (#1) to overseeder hitch using spacer tube (#2), 3/4" x 4" bolt (#3), lock washer (#4), and hex nut (#5). Tighten nut to the correct torque. 3. Assembly front roller scraper (#25) to mounting brackets (#22) with 1/2"-13 x 1 1/4" GR5 bolt (#26), lock washers (#27) and hex nuts (#28). Draw hex nuts up snug. 4. Bolt mounting brackets (#22), front roller arm (#6), and front roller (#7) together with two 1/2"-13 x 2" GR5 bolts (#23), flat washers (#24), spring lock washers (#9) and hex nuts (#10). Draw nuts up snug. 5. Bolt mounting brackets (#22), front roller arm (#6), and front roller (#7) together with two 1/2"-13 x 2" GR5 bolts (#23), flat washers (#27), spring lock washers (#9) and hex nuts (#10). Draw nuts up snug. 6. Bolt front roller arm (#6), and front roller (#7) together with two 1/2"-13 x 1 1/2" GR5 bolts (#8), spring lock washers (#9) and hex nuts (#10). Draw nuts up snug. 7. Attach front roller assembly to your overseeder using 5/8"-11 x 2" GR5 bolts (#11), lock washers (#12) and hex nuts (#13). 8. Tighten hex nuts (#10 & #13) to the correct torque. 9. Adjust front roller scraper (#25) with a slight gap between scraper and front roller arm (#6). Hold scraper in this position and tighten hex nuts (#28) to the correct torque. 10. Use 1/2" x 2 1/2" x 3 1/2" long U-bolts (#15), lock washers (#16), and hex nuts (#17) to attach turnbuckle mounts (#14) to the Overseeder frame. Refer to Figure 2 & Figure 3: 11. Turnbuckle Mounts (#14) should be Spaced 7 11/16" from inside edge of end plates as shown. 12. Attach turnbuckles (#18) to mounts (#14) and front roller arm (#6) with 5/8"-11 x 2 1/2" GR5 bolts (#19), lock washers (#20) and hex nuts (#21). Tighten nuts to the correct torque. 13. Refer to Section on Adjustments in your Overseeder Operator’s Manual 308-303M for instructions on how to set cutting depth of knives with the front roller. NOTE: Some parts may already be assembled. NOTE: 7 11/16" dimension in Figure 3 is the same on both 48" model and 72" model Overseeders Hole Locations Typical on Both Ends of Seeder Figure 1 Front Roller Assembly (Model OS1548 Shown) Figure 2 Turnbuckle Locations Typical on Both Ends of Seeder Figure 3 14801 14802 12883 Assembly Instructions 308-258A 15 Series 48" Overseeder Front Roller Assembly Your Kit Includes: Qty. Part No. Part Description 1 308-247H FRONT ROLLER WELDMENT OS1548 2 308-252K TURNBUCKLE ASSY 12 3/8-17 7/8 2 308-253H UPPER TURNBUCKLE MOUNT 1 308-255H FRONT ROLLER ARM OS1548 1 308-260H FLOATING TOP LINK 1 308-348H OS1548 FRNT ROLLER SCRAPER RVSBL 1 308-400D SPACER 1 1/4OD X 13/16ID X 2LG 2 308-405D FRONT ROLLER SCRAPER (MOUNTING ANGLE) 2 802-034C HHCS 1/2-13X1 1/4 GR5 2 802-055C HHCS 5/8-11X2 GR5 4 802-058C HHCS 5/8-11X2 1/2 GR5 1 802-068C HHCS 3/4-10X4 GR5 2 802-091C HHCS 1/2-13X1 1/2 GR5 2 802-128C HHCS 1/2-13X2 GR5 14 803-020C NUT HEX 1/2-13 PLT 6 803-021C NUT HEX 5/8-11 PLT 1 803-027C NUT HEX 3/4-10 PLT 14 804-015C WASHER LOCK SPRING 1/2 PLT 2 804-017C WASHER FLAT 1/2 USS PLT 6 804-022C WASHER LOCK SPRING 5/8 PLT 1 804-023C WASHER LOCK SPRING 3/4 PLT 4 806-010C U-BOLT 1/2-13 X 2 1/2 X 3 1/2 2 822-094C BRG PB 1.37ID 308-259A 15 Series 72" Overseeder Front Roller Assembly Your Kit Includes: Qty. Part No. Part Description 1 308-248H FRONT ROLLER WELDMENT OS1572 2 308-252K TURNBUCKLE ASSY 12 3/8-17 7/8 2 308-253H UPPER TURNBUCKLE MOUNT 1 308-256H FRONT ROLLER ARM WELDMENT OS1572 1 308-260H FLOATING TOP LINK 1 308-349H OS1572 FRONT ROLLER SCRAPER RV 1 308-400D FLOATING TOP LINK SPACER TUBE 2 308-405D FRONT ROLLER SCRAPER (MOUNTING ANGLE) 2 802-034C HHCS 1/2-13X1 1/4 GR5 2 802-055C HHCS 5/8-11X2 GR5 4 802-058C HHCS 5/8-11X2 1/2 GR5 1 80...