Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Troy-Bilt, модель 902032

Производитель: Troy-Bilt
Размер: 3.38 mb
Название файла: 21547014_ENG.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer. BEFORE EACH USE • Check engine oil level. • Check tine operation. • Check for loose fasteners. LUBRICATION Keep unit well lubricated (See “LUBRICATION CHART”). ...................... ................ .......................... .............................. .............................. ............................................ .................................. ................................ .................................. ................................................................ .......................................................... .................................................... .................................... .............................. ............................ .......................... ............................ .............................. .............................. .......................... ...... .. .. .. ................................................................................................................................................................................ ........................................................................................................................................ .............................................................................................................................................................................. ..SAE 30 OR 10W-30 MOTOR OIL ..REFER TO MAINTENANCE “ENGINE” SECTION .. EN GINE .. TINE CON TROL .. IDLER ARM MAINTENANCE Disconnect spark plug wire before performing any maintenance (except car bu re tor adjustment) to prevent accidental start ing of engine. Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Re move fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris. Do not touch hot muffler or cylinder fins as contact may cause burns. ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE vis cos i ty grade according to your expected temperature. ........................................................................................................................................................................................................................ Fig. 11 NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc.) improve starting in cold weather, these multi viscosity oils will result in increased oil consumption when used above 32°F (0°C). Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 50 hours of operation or at least once a year if the tiller is not used for 50 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Add SAE 30 motor oil or equivalent. Tighten oil filler plug securely each time you check the oil level. TO CHANGE ENGINE OIL (See Figs. 11 and 12) Determine temperature range expected before oil change. All oil must meet API service classification SG-SL. • Ensure tiller is on level surface. • Oil will drain more freely when warm. • Catch oil in a suitable container. • Remove drain plug. • Tip tiller forward to drain oil. • After oil has drained completely, replace oil...

Эта инструкция также подходит к моделям:
Садовые инструменты - 902032 (3.38 mb)
Садовые инструменты - 902032 (3.38 mb)
Садовые инструменты - 902032 (3.38 mb)
Садовые инструменты - 902032000203200 (3.38 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории