Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
to 7:00 p.m. Sat. 9 a.m. to 4 p.m. For Parts Sales: 1-800-648-6776 For Technical Service: 1-800-833-6990 In Canada: Garden Way Incorporated 320 Van Sickle Road, Unit 12 St. Catherines, Ontario L2R 6P7 Mon.-Fri.: 8 a.m. to 5:00 p.m. For Parts Sales or Technical Service: 1-800-225-3585 CAUTION We urge that you use only genuine TROY-BILT® replacement parts, which meet all of the latest requirements. Replacement parts manufactured by others could present safety hazards even though they may fit on this product. PARTS ORDERING INFORMATION Parts for your machine may be ordered from your local servicing dealer or directly from the Factory (see factory address and phone numbers on page at left). Please remember that we or your local dealer will need to know the identification numbers of your machine to give you the most efficient service. Please see below for how to identify and record the identification numbers for your machine. When ordering parts, please be sure to provide the following information: 1. The SERIAL NUMBER of your machine. 2. The PART NUMBER of the part. 3. The PART DESCRIPTION. 4. The QUANTITY needed. If you need engine service or parts: For engine service or parts, please contact your local authorized engine dealer. Look in the Yellow Pages of your phone book under “Engines-Gasoline” for the name of your nearest authorized engine dealer. An authorized dealer can handle all parts, repairs, and warranty service concerning the engine. NOTE: Some parts on your engine are exclusive to this machine and may not be available from the engine dealer. Refer to the engine drawings in this Parts Catalog to identify and order these exclusive parts. IDENTIFICATION NUMBERS Please write the Model and Serial Numbers of your machine in the spaces provided below. You can find the location of these numbers by referring to the following illustration. Model Number:_ All references to left, right, front and rear of the machine are determined by standing in the operator’s position and facing the direction of forward travel. Serial Number: IMPORTANT: Some replacement parts that you receive may vary slightly in shape, color, or texture from the original parts. This is because certain parts are supplied to us by more than one manufacturer. Please be assured, however, that all parts must conform to our rigid quality specifications, and any slight variations will not affect the fit or performance of these parts. 1 TROY-BILT® HORSE TILLER MODELS 12068, 12069, 12070 AND 12071 HANDLEBAR ASSEMBLY (Figure 1) REF No. PART No. DESCRIPTION QTY. REF No. PART No. DESCRIPTION QTY 1 9548 Bolt-Hex hd., flanged self-locking 16 Throttle Control & Cable—Briggs& Grade 5,1/2-13x3-1/2"............ 1 Stratton engine only (also see Ref. 2 9119 Knob-handlebar height adjustment No. 24A)..................................... 1 (incl. Ref. No. 3)........................ 1 16A 9650 Throttle Control & Cable—8HP Kohler 3 9120 Ring-retaining (tolerance ring)...... 1 engine only................................. 1 4 1881 Stud-handlebar height adjustment 17 1900763 Decal-Forward Interlock Lever...... 2 (Incl. Ref. No.’s 2,3 and 5)......... 1 18 9202 Tie-plastic..................................... 2 5 9803 Nut—hex, 1/2"-13............................ 1 19 9219 Plug-wire harness retainer............ 2 6 1900854010 Clamp-left, handlebar height 20 2551 Handlebar Wire Harness Assy- adjustment................................. 1 forward interlock system........... 1 7 1900856010 Ratchet-left, handlebar height 21 9250 Handlebar Switch-forward interlock adjustment................................. 1 system....................................... 2 8 1900857010 Ratchet-right, handlebar height 22 9385 Lock Pin—handlebar switch............ 2 adjustment................................. 1 23 2543 Switch Housing-handlebar switch. 2 9 1900855010 Clamp-right, handlebar height 24 90039 Screw-pan head, 10-24 x 1/2", adjustment................................. 1 thread-forming........................... 2 10 1900858010 Base-handlebar mounting............. 1 24A 9733 Screw—phiilips head, 10-32 x 1/2“, 11 2704 Handlebars—(Incl. 2 of each Ref. thread-forming........................... 1 No.’s 12,17 and 28 and 1 Ref. 25 2546 Lever-forward interlock................. 2 No. 13)....................................... 1 26 9199 Pivot Pin-forward interlock lever... 2 12 9125 Grip-handlebars............................ 2 27 9514 Retaining Ring-klip ring-forward 13 2715 Decal-operator control panel......... 1 interlock lever............................. 2 14 9547 Bolt-curved head G5,1/4-20 x 2".. 1 28 9387 Return Spring-forward interlock 15 9844 Nut-hex, flanged self-locking, whiz lever........................................... 2 lock, 1 /4“-20............................... 1 2 MODELS 12068, 12069, 12070 AND 12071_TROY-BILT® HORSE TILLER WHEELS/TINES/PTQ DRIVE LEVER & YOKE ASSEM...
Эта инструкция также подходит к моделям:Садовые инструменты - 12068-7HP (2.38 mb)