Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
STATEMENT OF POLICY It is the policy of Worksaver, Inc. to improve its products where it is possible and practical to do so. Worksaver, Inc. reserves the right to make changes or improvements in design and construction at any time, without incurring the obligation to make these changes on previously manufactured units. ATV Broadcast Seeder - Spreader Safety Instructions Assembly & Mounting Tractor Preparation Maintenance Operating Instructions Repair Parts ATTENTION! SAFETY RULES 1. Read instruction manual and make sure all operators are knowledgeable on correct operation of equipment and familiar with the Safety Rules of Operation. 2. Never allow riders on equipment. 3. When operating on rough or uneven terrain, use extreme caution and a safe operating speed. 4. When spreading seed or fertilizer, always use safety goggles. 5. Never operate equipment when anyone is within 50 feet of seeder/spreader. Before operating equipment – If you have any questions regarding the proper assembly or operation, contact your dealer or representative. To the All implements with There is no substitute who recognizes The manufacturer has implement to be used BEFORE YOU START! ! Read the safety messages Observe the rules of safety THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT SAFETY WARNING MESSAGES. CAREFULLY READ EACH WARNING MESSAGE THAT FOLLOWS. FAILURE TO UNDERSTAND AND OBEY A SAFETY WARNING, OR THIS SYMBOL MEANS – ATTENTION! – BECOME ALERT! – YOUR SAFETY IS INVOLVED! RECOGNIZE A SAFETY HAZARD, COULD RESULT IN AN INJURY OR DEATH TO YOU OR OTHERS AROUND YOU. THE OPERATOR IS ULTIMATELY RESPONSIBLE FOR THE SAFETY OF HIMSELF, AS WELL AS OTHERS, IN THE OPERATING AREA OF THE ATV AND EQUIPMENT. UNDERSTAND SIGNAL WORDS Note the use of the signal words DANGER, WARNING WARNING: Indicates a potentially hazardous sit- and CAUTION with the safety messages. The uation that, if not avoided, could result in death appropriate signal word for each has been selected or serious injury, and includes hazards that are using the following guidelines: exposed when guards are removed. It may also be used to alert against unsafe practices. DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. CAUTION: Indicates a potentially hazardous sit- This signal word is to be limited to the most extreme uation that, if not avoided, may result in minor or situations typically for machine components which, for moderate injury. It may also be used to alert functional purposes, cannot be guarded. against unsafe practices. IMPORTANT SAFETY INFORMATION! Working with unfamiliar equipment can lead to careless injuries. Read this manual, and the manual for your ATV, before assembly or operating, to acquaint yourself with the machine. It is the equipment owner’s responsibility, if this equipment is used by any person other than yourself, is loaned or rented, to make certain that the operator, prior to operating: 1. Reads and understands the operator’s manuals. 2. Is instructed in safe and proper use. The use of this equipment is subject to certain hazards which cannot be protected against by mechanical means or product design. All operators of this equipment must read and understand this entire manual, paying particular attention to safety and operating instructions, prior to using. If there is something in this manual you do not understand, ask your supervisor, or your dealer, to explain it to you. Most accidents occur because of neglect or carelessness. Keep all helpers and bystanders fifty feet (50’) from operating equipment. Only properly trained people should operate this ATV and attached implement. Always stop the ATV, set brake, shut off the engine and remove the key before dismounting. Never leave equipment unattended with the engine running. 1 SAFETY ( continued) All equipment is potentially There is no substitute recognizes potential hazards When the use of hand tools is installation, adjustment, maintaining, repairing, removal, or moving the tool manufacturer for that specific task. Personal protection equipment including safety assembly, installation, operation, adjustment, maintaining, Always use two people to handle heavy, unwieldy components during assembly, installation, removal, or moving of the implement. Never place any part of your body where it would be in danger if installation, operation, maintaining, repairing, removal, or moving the A heavy load can cause instability of the vehicle. Use extreme care during travel. Slow down on turns and watch out for bumps. The vehicle may need front counter-weights to counter-balance the weight of the implement. An unstable vehicle could steer badly and possibly tip over, causing injury or death. Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating Consult your doctor about operating tractor and implement while taking prescription medications. Do not allow others to ride on the ATV with an operator. Riders ...