Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
[1] Apply POWER BLENDXTM Grease. lubrICaTIon Level 1. Parts Required: POWER BLENDXTM 8 oz. (P/N 91014) or Lithium Base Grease. Gear Housing 1. Clean all loose debris from gear box. 2. Remove plug (A) and check level of grease. Grease should fill gear case to bottom of grease plug hole. 3. Add grease if necessary using manual grease gun or squeeze- type tube. Do not use high pressure grease gun. DO NOT overfill.. 4. Install plug (A). A Drive Shaft (Lower) 1. Loosen two (2) screws (B) and remove center locating screw (C). Pull gear box and shield from drive shaft housing. 2. Pull flexible cable from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] grease. 3. Slide the flexible cable back in the drive housing. DO NOT get dirt on the flex cable. 4. Install the gear housing and shield assembly. IMPORTANT Flat edge of washers (D) must be against drive shaft. C B D Model -------------------------------------------------------99944200600 Shaft Length ------------------------------------------------870 mm (34.3 in.) Attachment Width -----------------------------------------280 mm (11 in.) Attchment Height ------------------------------------------255 mm (10 in.) Weight (dry) w/blade --------------------------------------1.5 kg. (3.32 lb.) Drive Shaft --------------------------------------------------6.35 mm (1/4 in.) Flex Shaft Rotating Direction -----------------------------------------Counter-clockwise viewed from the top Cutter Attachment -----------------------------------------80 Tooth, 203 mm (8 in.) Metal Brush Blade sTorage Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft. speCIfICaTIons 13 noTes noTes 15 noTes servICIng InformaTIon parTs/serIal number Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the unit with you. You can find these numbers on the engine housing. For future reference, write them in the space provided below. Model No. _____________ SN. ____________ servICe Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required. eCho Consumer produCT supporT If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the ECHOConsumer Product Support Department at 1-800-673-1558 from 8:30 am to 4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit to help your Consumer Product Support Representative. warranTy r...
Эта инструкция также подходит к моделям:Садовые инструменты - PAS-2100 TYPE 1E (706.46 kb)
Садовые инструменты - PAS-2400 TYPE 1E (706.46 kb)
Садовые инструменты - SRM-2100SB TYPE 1/1E (706.46 kb)
Садовые инструменты - SRM-2400SB TYPE 1/1E (706.46 kb)