Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
As Req’d 17 1224-2 Shim-same as above, .030* As 2 20873 Cover—tiller housing..................... 1 .Req'd 3 1129-1 Gasket—tiller housing cover, .010“. As 17 1224-3 Shim-same as above, .005” As thick...........................................Req'd .Req'd 3 1129-2 Gasket-same as above, .030" As 17 1224-4 Shim-same as above, .062" As thick...........................................Req'd .Req'd 4 1901972 Shaft—tiller tine.............................. 1 18 1714 Bearing & Cup-sold as set only.. .. 2 5 97074 Ball Bearing................................... 2 19 11602 Shaft-main tiller drive (incl. an 6 1901976 Worm Gear-bronze, tiller tine integral worm gear, plus two shaft.......................................... 1 pressed-on cone roller bearings, 7 1104 Key—tiller tine shaft, woodruff key. 1 two bearing cups (Ref. No. 18) and 8 97073 Seal—oil, tiller tine shaft................. 2 one shoulder washer............... .. 1 20 9617 Seal—oil, drive shaft, front........... .. 1 TILLER DRIVE SHAFT ASSEMBLY 21 9517 Retaining Ring-internai.............. .. 1 9 9500 Retaining Ring-external................ 2 10 1909138 Dog Clutch—tiller drive shaft.......... 1 TRANSMISSION HOUSING AND QlPSTtCX 11 9301 Key-3/16" xl’............................... 1 23 1902000 Housing—tiller attachment (inci. 12 2127 Spring-dog clutch......................... 1 pressed-on sleeve in front of 13 1138-1 Shim-dog clutch, 1/16*(.62“} thick.. 1 housing). Empty housing 14 1915089 Screw Kit, includes three (3) without shafts, gears, seals, 1/4“-20 x 7/8* self-sealing dipstick, etc. Call Factory screws..............................As Req’d before ordering....................... ... 1 15 1900881001 Cap-rear bearing........................... 1 24 1909157 Dipstick—oil, tiller attachment..... ... 1 16 1124-2 Gasket-rear bearing cap............... 1 Paris List MODELS 12089, 12090, 12204 BOLO TINE ASSEMBLIES 58 MODELS 12089, 12090, 12204 Parts List REF PART No. No. DESCRIPTION QTY. REF PART No. No. DESCRIPTION QTY. STANDARD TILLING TINES 1 1901975001 Tine Holder-welded steei. fits left or right sides...................... 2 2 1982612 Boit-ftex hd., 3/8-16 x 2"............. 4 6 1270-1A Bolo Tine-single, left hand. Used on left and right side tine assy. Tine is stamped either “EL” or “AL". (Incl. two each of Ref. No.’s 8 and 10)................................. 8 7 1270-2A Bolo Tine-single, right hand. Used on left and right side tine assy. Tine is stamped either “ER' or “AR”. (Inci. same hardware as Ref. No. 6)............................... 8 8 1100046 Bolt-hex hd., 3/8-16x1*............. 16 10 1110108 Locknut-hex, 3/8M6.................. 20 1901118 Tine Replacement Kit-unassemDieti (Incl. eight each of Ref. No.’s 6, and 7, sixteen each of Ref. No.'s 8 and 10). Includes easy-to-follow installation instruction. DOES NOT INCLUDE tine holders, holder mounting hardware, or tine shaft keys................................. 1 CUSTOM TILLING TINES Special hard-faced, high-chrome carbon ailov tines that are thicker than standard Bolo Tines. These tines better resist the abrasive action of rocky, gritty or sandy soil as compared to standard Bolo Tines, and are especially suited for custom tilling or market gardening. 10802 Custom Tilling Tine Kit—
Садовые инструменты - 12088 (1.77 mb)
Садовые инструменты - 12088-7HP (1.77 mb)
Садовые инструменты - 12089 (1.77 mb)
Садовые инструменты - 12089-8HP (1.77 mb)