Оценок - 4, средний балл: 4.3 ( )

Производитель: McCulloch Размер: 491.8 kb Название файла: Язык инструкции:

The purpose of this safety pole barrier is to maintain a safe distance between the metal blade and the user under all normal or exceptional circumstances. 2) Harness ring (B) must never be moved from its original position to avoid unbalancing the unit. Front handles can be separately adjusted to make usage easier on units fitted with “U” shaped handles. 3) The following accessories can be assembled to your trimmer: a) blade, b) nylon string head. Do not attach any blade to a unit without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator and/or bystanders. a) WHEN USING A BLADE ENSURE THE CORRECT GUARD IS FITTED. b) WHEN USING A NYLON STRING HEAD ENSURE THE CORRECT GUARD IS FITTED. When using the unit always hold the front part of the machine (blade or nylon string head) below your waist. NYLON STRING HEAD: Always make sure it has been correctly assembled and fitted. The nylon head is suitable to cut grass and weeds wherever there might be obstacles like trees, fences or walls. The nylon string head also reduces the likelihood of damaging small plants and trees bark. Only use flexible, nonfilament nylon line in the nylon line head as specified by the manufacturer. Never use metallic line which could break off and become a dangerous projectile. BLADE: Always make sure it has been correctly fitted. When fitting or changing a cutting device, ensure you follow the instructions in the section “Blade or nylon string head assembly” with extreme precision. Fit these cutting devices using all and only the parts as described, and in the correct order. 4) BLADES: you can cut any type of grass, brushwood or shrub. Operate the machine like a sickle always cutting at full throttle. 5) WARNING: always use a well sharpened blade. A blade with worn teeth besides providing poor performance might also generate a sudden thrust. This can result in a violent sideways kick caused when the blade touches against wood or solid bodies, such thrust might then cause the operator to loose control of the machine itself. Never attempt to work with a damaged blade but replace it with a new one. THRUST: can occur when using any type of circular blade within the risk area: therefore it is advisable to cut using the remaining area of the blade. CIRCULAR SAW BLADE: it can be used to cut sappling, small trees with a diameter up to 7 cm., to clean shrubs. WARNING: IF A METAL 24-80 TOOTH BLADE IS USED (A TOOTH SAW BLADE) A DOUBLE SHOULDER HARNESS AND A SAFETY A GUARD (PROTECTION) MUST ALSO BE USED AUTHORISED SERVICING DEALERS. AS MARKED IN THE SUMMARY CHART (SEE THE USE OF NON-ORIGINAL ACCESSORIES CLOTHES SECTION IN SAFETY CHAPTER: AND SPARE PARTS INCREASES THE RISK OF ALWAYS WEAR A HELMET). ACCIDENTS AND IN SUCH A CASE THE COMPANY IS NOT LIABLE FOR DAMAGE TO ALWAYS USE GENUINE ACCESSORIES AND PEOPLE AND/OR THINGS. SPARE PARTS AVAILABLE FROM D. FUEL MIX Use only fuel recommended by this...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: