Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
TINE CONTROL - Used to engage tines. LEVELING SHIELD - Levels tilled soil. OUTER SIDE SHIELD - Adjustable to protect small plants from being buried. RECOIL STARTER HANDLE - Used to start the engine. SHIFT LEVER - Used to shift transmission gears. SHIFT LEVER INDICATOR - Shows which gear the trans mis sion is in. THROTTLE CONTROL - Controls engine speed. CHOKE CONTROL DRAG STAKE OPERATION FUEL VALVE OPERATION 00155 The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses. HOW TO USE YOUR TILLER Know how to operate all controls before adding fuel and oil or attempting to start engine. STOPPING (See Fig. 8) TINES AND DRIVE 1. Release tine control to stop move ment. 2. Move shift lever indicator to “N” (neutral) position. ENGINE 3. Set the speed control lever at the low speed position and allow the engine to run at low speed for 1 or 2 minutes before stopping. 4. Turn the ENGINE SWITCH counterclockwise to the position “ O ” (OFF). 5. Close the fuel valve. 6. Pull the starter handle slowly and return the handle to its original position when resistance is felt. This operation is necessary to prevent outside moist air from intruding into the combustion chamber. NOTE: Never use choke to stop engine. IMPORTANT: TO STOP ENGINE IN AN EMERGENCY, TURN THE ENGINE SWITCH TO THE OFF POSITION. 7 Fig. 8 TINE CONTROL “OFF” (DOWN) PO SI TION TINE CONTROL “ON” (UP) PO SI TION THROTTLE CONTROL ENGINE SWITCH FUEL VALVE RECOIL STARTER THROTTLE CONTROL ENGINE SWITCH FUEL VALVE TINE OPERATION - WITH WHEEL DRIVE • Always release tine control before moving shift lever into another position. • Tine movement is achieved by moving shift lever to either the counter rotating ( ) till position or the forward rotating ( ) till position and engaging tine control. FORWARD - WHEELS ONLY/TINES STOPPED • Release tine control and move shift lever in di ca tor to “F” (forward) position. Engage tine control and tiller will move forward. REVERSE - WHEELS ONLY/TINES STOPPED • DO NOT STAND DIRECTLY BEHIND TILLER. • Release the tine control. • Move throttle control to “SLOW” position. • Move shift lever indicator to “R” (reverse) position. • Hold tine control against the handle to start tiller movement. HARD TO SHIFT GEARS • Briefly engage tine control and release or rock tiller forward and backward until are able to shift gears. DEPTH STAKE (See Fig. 9) The depth stake can be raised or lowered to allow you more versatile tilling and cul ti vat ing, or to more easily transport your tiller. TRANSPORT POSITION SHALLOWEST TILLING (CULTIVATING) DEEPEST TILLING DEPTH STAKE depth_stake_2 Fig. 9 OPERATION DRAG STAKE (See Fig. 10) The drag stake should be raised when tilling in the counter rotating ( ) till position. The drag stake should be lowered when tilling in the forward rotating ( )till position. Fig. 10 depth_stake_10 LOWERED (FOR WARD ROTATING TILL) RAISED (COUNTER ROTAT- ING TILL) TILLING (See Fig. 11) • Release...
Эта инструкция также подходит к моделям:Садовые инструменты - 21547000 (2.18 mb)
Садовые инструменты - 21547000 (2.18 mb)
Садовые инструменты - 21547000 (2.18 mb)
Садовые инструменты - 21547000 (2.18 mb)