Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions and replacement parts, please call 1-800-444-3353. Specifications Blade Dimensions 0.041” Thick x 12” Long / 6 Teeth Per Inch Jaw Dimensions 1-1/2” Diameter Lopper Cutting Capacity Throat Depth 2-1/4” Rope Length 110-1/2” Pole Dimensions 53-5/8” c 1-3/32” Tool Weight 4.52 Lbs. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! Revised Manual 09k Page 2 SKU 09712 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use the Pruner in damp or wet locations. Don’t expose to rain. Keep work area well lighted. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle the Pruner. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 5. Use the right tool for the job. Do not attempt to force a small tool to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye protection. Always wear ANSI approved impact safety goggles and a full face shield to protect you from falling branches. 8. Do not overreach. Keep proper footing and balance at all times. 9. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool ropes periodically and, if damaged, have them replaced by an authorized technician. The handle must be kept clean, dry, and free from oil and grease at all times. 10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 11. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact. 12. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. 13. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 14. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the Pruner. 15. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 16. Use tools with both hands when required. Pruners require the use of both hands when operating. This helps maintain tool stability and keeps hands away from the working area of the tool. 17. Cutting blade is extremely sharp. The Pruner Blade (#2) will cut through whatever is in its jaws. Keep hands clear of cutting jaws. 18. Check surrounding area. Before cutting, check that no overhead wires are within reach of the pruner. Check that the area where the cut branches will fall to the ground is clear of pets, bystanders, and any breakable objects. Safety Warnings and Precautions (continued) Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It mus...