Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
In such cases the operator will require noise protection (e.g. wearing of ear protectors). Interference suppressed in accordance with EN 55014, EN 61000-3-2:95, EN 61000-3-3:95 and EN 60555 (VDE 0875). We reserve the right to make changes to the technical specifications. The hedge trimmers are constructed in line with the latest regulations in accordance with DIN 57740/ VDE 0740 and Cenelec HD 400-1 and HD 400-3 and conform fully to equipment safety law regulations as well as VDE 0700, EN 60335, 73/23 EEC, 93/68 EEC, 89/392 EEC, 89/336 EEC and 93/44 EEC. General safety instruction Usage of hedge trimmer always involves a risk of accidents, therefore please observe the relevant accident prevention instructions. The machine has been constructed according to the latest technology and in accordance with the recognised technical safety regulations. Nevertheless, use of the machine can involve risks to the user or third persons, and can cause damage to the machine or other objects., Attention: Using electric power tools, you must observe following fundamental safety instructions to protect yourself against electric shock, against danger of injuries and danger of fire. Read all these instructions before using the grass trimmer and observe them. Keep these safety instructions at a safe place. Use the machine in a safety conscious manner for suitable applications in a technically perfect condition only and with due regard to the operating instructions! Immediately rectify or have any faults rectified which could adversely affect safety! This machine may cause serious injuries. Please read the instruction manual carefully as to the correct handling, the preparations, the maintenance and the proper use of the hedgetrimmer. Familiarize yourself with the machine before the first, use and also have yourself introduced to practical use of the machine. 3. Application_ The machine is only intended for trimming hedges. Use for any other purpose constitutes inappropriate use. The manufacturer / supplier is not liable for any injury and/or damage arising from inappropriate use. This risk is the sole responsibility of the user. Appropriate use of the machine also includes adherence to the operating instructions and compliance with the servicing and maintenance instructions. Always keep the operating instructions close at hand during operation! GB-1 4. Safety Instructions_ 1. Always disconnect the plug from the a mains socket before carrying out any cljwork on the equipment, before cleaning and before moving the equipment. 2. The use of hedge trimmers involves certain risks. Attention: Danger! Rotating machi-tLiJnery. 3. The hedge trimmer should always be held with both hands. 4.' Before using the equipment clear the working area of any foreign objects (e.g. stones) and be aware of foreign objects during operation of the machine! If the machine becomes jammed e.g. by thick branches, switch off and disconnect the machine from the mains socket before investigating and rectifying the cause of the jam. Take special care when switching the machine on again. 5. Check the flex and all connections for any visible faults before using the machine ¿¿J(plug disconnected). Do not use a faulty flex. a 6. Keep the flex away from the cutting area. ¿1j7. Do not use the trimmer in wet weather and do not use it to cut wet hedges. 8.. Carry the trimmer by the handles provided and keep hands away from the cutting blades. 9. In line with agricultural Trade Association Regulations only persons over the age of 17 may work on their own with electric hedge trimmers. Use is permitted for persons over 16 years if the work is carried out under the supervision of adults. 10. We would recommend that safety clothing is worn during the work and that eyes, ears, hair, hands and feet are fully protected. Protective gloves should also be worn. 11.After switching off the hedge trimmer and a before carrying out any cleaning, ensure /'\that the motor cannot be switched on inadvertently by engaging the switch lock. In any case, disconnect plug from mains socket. 12. Check the cutting unit regularly for damage and if damage is discovered, the cutting unit should be properly repaired. 13. Be aware of your responsibility as user towards third parties in the working area. 14. The trimmer must be properly checked and serviced. If the blades get damaged they should only be exchanged in pairs. In the event of damage from impact, specialist’s inspection is essential. 15. Only use extension leads which have been authorised for outside use. These flexes must not be lighter than PVC covered flex conforming to 227 IEC 53. They must be water spray protected. If the flex has to be changed, replace it only with authorised flex H05 VV F with centrally shaped plug to fit sockets complying with IEC 320. Equipment which will be used in different outside locations must be connected via residual current-operated circuit breaker. 16. Ensure that the equipme...