Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Allow the engine to cool before storing in any enclosure. • Always refer to the operator’s guide instructions for im por tant details if the tiller is to be stored for an extended period. - IMPORTANT CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRIT I CAL IN FOR MATION IN THIS MANUAL. IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSI BIL I TY OF DAM AG ING THIS EQUIP MENT. NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions. Look for this symbol to point out impor tant safety precautions. It means CAUTION!!! BE COME ALERT!!! YOUR SAFE TY IS INVOLVED. CAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug in order to prevent ac ci den tal starting when setting up, trans port ing, adjusting or making re pairs. WARNING The engine exhaust from this product con tains chem i cals known to the State of Cal i for nia to cause cancer, birth defects, or other reproductive harm. 2 PRODUCT SPECIFICATIONS Gasolina Capacity: 3 Quarts (2.8L) Unleaded Reg u lar Oil (API-SG-SL): SAE 30 (Above 32°F) (Capacity: 20 oz./0.6L) SAE 5W-30 (Below 32°F) Spark Plug : (Gap: .030"/0.76mm) NGK-BPR6ES TORCH-F6RTC CONGRATULATIONS on your purchase of a new tiller. It has been designed, en gi neered and manu fac tured to give you the best pos sible de penda bil ity and per form ance. Should you experience any prob lems you can not easily remedy, please contact your nearest authorized service center. We have com pe tent, well-trained tech ni cians and the proper tools to service or repair this unit. Please read and retain this manual. The in struc tions will enable you to assemble and main tain your tiller prop erly. Always observe the “SAFETY RULES”. CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tiller. • Follow instructions under “Maintenance” and “Stor age” sections of this Owner’s Manual. WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local laws (if any). If a spark arrester is used, it should be maintained in effective work ing order by the operator. In the state of California, a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See your authorized service center/ DEPARTMENT for spark arrester. TABLE OF CONTENTS SAFETY RULES ..........................................................2 CUSTOMER RESPONSIBILITIES ...............................3 PRODUCT SPECIFICATIONS .....................................3 ASSEMBLY ...............................................................4-6 OPERATION ...........................................................7-11 MAINTENANCE SCHEDULE ....................................12 MAINTENANCE ...................................................12-14 SERVICE & ADJUSTMENTS ...............................15-17 STORAGE ..................................................................18 TROUBLESHOOTING ...............................................19 REPAIR PARTS ....................................................20-26 WARRANTY ............................................. BACK PAGE 3 ASSEMBLY Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) Utility knife (1) Tire pressure gauge (1) Pair of pliers (1) 9/16" wrench OPERATOR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the operating position (standing behind tiller handles). FRONT OPERATOR’S POSITION LEFT RIGHT Fig. 1 CONTENTS OF HARDWARE PACK (1) Carriage Bolt 3/8-16 UNC x 1 Grade 5(2) Handle Locks (1) Center Locknut 3/8-16 UNC (1) Handle Lock Lever(1) Flat Washer 13/32 x 1 x 11 Gauge (1) Hairpin Clip (1) Pivot Bolt 3/8-16 UNC Grade 5 Extra Shear Pins & Clips 4 5 ASSEMBLY • Grasp handle assembly. Hold in “up” position. Be sure handle lock remains in gearcase notch. Slide handle assembly into position. Fig. 4 UNPACKING CARTON (See Fig. 2) CAUTION: Be careful of exposed sta ples when handling or disposing of cartoning material. IMPORTANT: WHEN UN PACK ING AND AS SEM BLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLES. • While holding handle assembly, cut cable ties se cur ing handle assembly to top frame and depth stake. Let handle assembly rest on tiller. • Remove top frame of carton. • Slowly ea...