Оценок - 6, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
Install Metal Shield when using plastic or metal blades. 1. Remove vinyl protector from PTO shaft. 2. Place plastic shield on bottom of bearing housing flange. 3. Place shield plate on plastic shield, align holes. Install three (3) screws from bottom through plate and shield into gear case. 4. Install adapter plate (A) onto PTO shaft. NYLON LINE HEAD INSTALLATION (Use with Plastic Shield) Tools Required: Head Locking Tool Parts Required: Nylon Line Head 1. Be sure upper adaptor plate remains on PTO shaft. 2. Align locking hole in upper plate with notch in edge of gear housing and insert head locking tool (B). 3. Thread line head onto shaft by turning it counter clockwise until head is tight against upper plate. 4. Remove head locking tool. 12 тесна. FRONT HANDLE INSTALLATION Tools Required: Screwdriver Parts Required: Front Handle Assembly 1. Position front handle for comfortable operation and secure screws. Pre - Operation OPERATION WITH BLADES Preparing the Trimmer/Brush Cutter for Blade Use WARNING Âm DANGER Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, handle, and harness can result in serious personal injury. Follow installation instructions included in optional kits. Grass/Weed Blades Require: Install Blade Conversion Kit, P/N 99944200415 -Includes metal shield (A), barrier bar (B), and shoulder harness (C). NOTE The Barrier Bar is NOT A HANDLE and should not be gripped when using or carrying the unit. NOTE The Barrier Bar is used to restrict rearward movement of the unit. For heavy-duty or extended use, U-handles should be used. See your Echo dealer or Trimmer/Brush Cutter Safety Manual for details regarding U-Handles. If you have additional questions, contact your Echo Service Dealer, or call Echo directly at 1-800-673-1558. Grass Trimmer/Brush Cutter Operator's Manual Brush/Clearing Blades Require: Install U-Handle / Blade Conversion Kit, P/N 99944200521 - Includes metal shield (A), shoulder harness with hip pad (C), and U-Handles (D). Choosing the Correct Blade WARNING AA DANGER The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick-out and injury to yourself and bystanders. Plastic/Nylon Blades may be used where ever the nylon line head is used. DO NOT use this blade for heavy weeds or brush! 8 Tooth Weed/Grass Blade (P/N 69600120331) is designed for grass, garden debris and thick weeds. DO NOT use this blade for brush or heavy woody growth, 19 mm (3/4 in.) diameter or larger. 14 тесна. 80 Tooth Brush Blade (P/N 69500120331) is designed for cutting brush and woody growth up to 64 mm (2-1/2 in.) diameter. 22 Tooth Clearing Blade (99944200130) is designed for dense thickets and saplings up to 64 mm (2-1/2 in.) diameter. Use Shoulder/Waist Harness (P/N 99944200200) Use ofthe Shoulder/ Waist Harness is recommended for ALL Trimmer/Brush Cutter use. The Shoulder/Waist Harness suspends the trimmer from the operator's shoulder and reduces operator fatigue. The restrictive harness enhances operator safety by reducing the possibility of blade contact with the operator's hands and feet. Grass Trimmer/Brush Cutter * /- Operator's Manual 15 FUEL Fuel Requirements Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline or gasohol known to be good quality. Gasohol may contain up to 10% Ethyl (grain) alcohol or15% MTBE (methyl tertiary-butyl ether). Gasohol containing methyl (wood) alcohol is NOT approved. Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC Standards must be used. Echo brand premium Power Blend TM Universal 2-Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD and J.A.S.O. FC certified oil, such as Echo premium Power Blend TM, will void the two-stroke engine warranty. (Emission related parts only are covered for two years, regardless of two-stroke oil used, per the statement listed in the Emission Defect Warranty Explanation.) IMPORTANT Echo premium Power Blend TM Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past regardless of ratio specified in those manuals. Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline and remix. 5. Install fuel container cap and wipe any spilled fuel from container and surrounding area. IMPORTANT Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. Contact your ECHO dealer for ordering information. After refueling • Wipe any spilled fuel from the unit. • Move at least 3 m (10 ft.) fr...