Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Store unit in a dry, dust free place, out of the reach of children. DANGER Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark or serious personal injury may result. 2. Place the stop switch in the "OFF" position. 3. Remove accumulation of grease, oil, dirt and debris from exterior of unit. IMPORTANT Some tree sap and resins are corrosive. Thoroughly wash the guide bar and sprocket areas after each use, then coat metal parts with light oil. 4. Perform all periodic lubrication and services that are required. 5. Tighten all the screws and nuts. 6. Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the carburetor. 7. Remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole. A. Place a clean cloth over the spark plug hole. B. Pull the recoil starter handle 2-3 times to distribute the oil inside the engine. C. Observe the piston location through the spark plug hole. Pull the recoil starter handle slowly until the piston reaches the top of its travel and leave it there. 8. Install the spark plug (do not connect spark plug cable). 9. Install the guide bar cover on the guide bar and saw chain during storage. 3434 specIfIcatIons MODEL ----------------------------------------------------PPT-280 Length (Standard)------------------------------------------2.86 m (9 ft. 5 in.) Length (Extended) -----------------------------------------4.01 m (13 ft. 2 in.) Length w/extension----------------------------------------5.23 m (17 ft. 2 in.) Width --------------------------------------------------------.25 m (9.69 in.) Height -------------------------------------------------------.25 m (9.69 in.) Weight (dry) ------------------------------------------------8.7 kg (19.25 lb.) Engine Type ------------------------------------------------Air cooled, two-stroke, single cylinder gasoline engine Bore----------------------------------------------------------34.0 mm (1.34 in.) Stroke--------------------------------------------------------31.0 mm (1.22 in.) Displacement -----------------------------------------------28.1 cc (1.71 cu. in.) Exhaust System --------------------------------------------Spark arrestor muffler or spark arrestor muffler with catalyst Carburetor---------------------------------------------------Walbro with Purge Ignition System --------------------------------------------CDI (capacitor discharge ignition) Spark Plug --------------------------------------------------NGK BPM-8Y Gap 0.65 mm (0.026 in.) Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil) Fuel/Oil Ratio ----------------------------------------------50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FC/FD, two-stroke, air-cooled engine oil. Gasoline-----------------------------------------------------Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use alternative fuels such as E-15 or E-85. Oil------------------------------------------------------------Power Blend X TM Premium Universal 2-Stroke Oil Fuel Tank Capacity ----------------------------------------0.62 lit. (21.1 US fl. oz.) Starter System ----------------------------------------------Automatic Recoil Starter Clutch--------------------------------------------------------Centrifugal Type Sprocket Type ----------------------------------------------6 tooth spur, 9.53 mm (3/8 in.) pitch Power Transmission Shaft Assembly -------------------Aluminum Extrusion Gear Case Ratio--------------------------------------------1.5:1 Oiling System ----------------------------------------------Automatic Saw Chain Oil Capacity ----------------------------------225 ml (7.6 oz.) Handle-------------------------------------------------------Right hand grip w/throttle trigger and lockout Shoulder Harness ------------------------------------------Standard Idle Speed (RPM)------------------------------------------2,500 - 3,000 Clutch Engagement Speed (RPM)-----------------------3,800 Wide Open Throttle Speed (RPM) ----------------------9,500 - 11,500 Guide Bar and Saw Chain (91)--------------------------305 mm (12 in.); 9.53 mm (3/8 in.) pitch, 0.050 gauge Power PrunerTM oPeraTor's Manual 35 warranty statements ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions. THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS. Repair parts and accessories replaced under th...