Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Read and understand this entire manual before starting the planer. INFEED CLEARANCE: The infeed roller is always spinning while machine is in operation. Keep hands, clothing, and long hair away from the infeed area to prevent anything from being pulled into the planer and prevent serious injury. BODY POSITION: There is a chance that the material or work piece may kick back toward you during operation. Always stand to the side of the planer during the entire operation. NEVER place your face close to planer to look inside while planer is running. PLANING MATERIAL: Thickness planers are designed to plane natural solid wood stock. Trying to plane MDF, plywood, laminates, or other synthetic or man-made products may damage machine or cause injury. GRAIN: Always plane in the same direction or at a slight angle with the wood grain. Planing across the grain is hard on the planer and may cause the work piece to kick back. CLEAN STOCK: Always inspect and clean stock of nails, staples, or loose knots or other debris. This debris can kick back at the operator and will damage your knives when they contact the cutter head. CUTTING CAPACITIES: Do not push the planer beyond its listed capacities. Material kick back may result and injury to operator or damage to machine may result: • Maximum Depth of Cut ...................... 1/8" • Minimum Board Length ..................... 12" • Minimum Board Thickness ................ 1/4" • Maximum # of Boards at One Time ..... 1 PLANER COVERS: Never remov...