Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
The ability to create accurately dimensioned wood with parallel faces is crucial to virtually any woodworking task. Producing an ultra smooth, tear out free surface at the same time is a welcomed bonus. The JET JWP-15DX and JWP- 15HH have been designed to handle these tasks with the accuracy, durability and repeatability you want. Robust construction, a powerful motor, a rock solid table and a user- friendly knife changing system gives these planers the durability and value you need. Built around a fully enclosed, welded steel base cabinet, the JET JWP-15DX and JWP-15HH use several precisely machined iron castings to insure durability and precise, repeatable operation. A heavy-duty caster system built into the base makes moving the 517-lb JET JWP-15DX around the shop easy. A foot-operated brake locks the casters to keep it stationary during use. Motor power is delivered through a gang of three v-belts running in precisely machined pulleys. Should lifting be necessary, four pull-out rods are built into the cast iron base. These rods provide safe lifting points for straps or forklift arms. A powerful 3HP, (continuous duty rating) 1PH, 230V TEFC (totally enclosed fan cooled) motor is mounted within the base cabinet. Power is transmitted to the fixed cast iron cutterhead housing by three v-belts that turn precision-machined pulleys. A full-length belt cover is easily removed for maintenance by spinning off a pair of finger-operated knobs. The motor is operated and protected by a true magnetic switch mounted on the head assembly within easy reach. Quick-Change Knife System The JWP-15DX features 3 knives and our "Quick change knife system". The knives each have 2 cutting edges so that they can be flipped when one side becomes damaged or dull. The savings in time and money this feature brings is obvious, but there is more. Our Quick-change knife system makes this once frustrating task quick, simple and automatically accurate. We include a pair of magnetic tools - shown here removing a knife retainer plate – that helps prevent nicked fingers! An important feature of the JET JWP-15DX is how easily the knives are changed and set. A specially designed mounting and alignment system eliminates one of the most frustrating aspects of using many planers - changing and aligning its knives. When a knife becomes dull or damaged all one has to do is remove the 8 retaining screws and carefully remove it. The cutterhead has two precisely machined and located pins in each knife seat that mate exactly with two precisely machined and located slots in the knife. When changing or flipping a knife simply place it over the pins on the cutterhead seat, replace and tighten the 8 screws and it is automatically aligned and ready for use. No further adjustment is required. JWP-15HH with the Helical Cutterhead Our helical head with its spiral rows of carbide inserts creates ultra smooth surfaces yet has an exceptionally long cutter life. While designing the JET JWP-15HH we developed a criteria for a unique cutterhead that would insure the unmatched performance and reliability. That design specification meant the choice was very simple - a helical cutterhead with carbide inserts. The JET JWP-15HH cutterhead is so effective because its 68 carbide inserts are arranged in four spiral-shaped rows. The inserts have a 4” radius ground into them and are mounted so they approach the wood at a 14-degree angle. That creates a true shear cut that eliminates much of the impact and the resulting fiber disturbance common with other cutterhead designs. Also contributing to this excellent surface finish is the profile of the space between the rows of carbide inserts. These areas are specially designed to carry chips away from the cutting area and eject them before they cause any problems for your work surface. This helical cutterhead cuts so efficiently that it makes surprisingly little noise when cutting wood. In fact, it is so quiet, that new users often think that the JET JWP-15HH is not cutting wood at all! That is until they see the freshly planed surface emerge from the other side. The helical cutterhead inserts are precisely machined from solid high-grade carbide, each with four identical cutting edges. If an edge goes dull or is damaged, you simply index it to the next cutting edge! Each insert has a marking at one edge that makes indexing all or any number of them the same way very easy. The carbide cutters on the helical head each have four individual edges. Should one edge go dull the inserts can be indexed four times, each producing a totally new edge. Because the inserts and the seats into which they fit are so precisely machined, there is no adjustment or “fitting” necessary. Indexing or replacing an insert takes just seconds. Simply loosen the T25 Torx screw (wrench included), turn the insert to its new position and tighten the screw. The durability of the carbide combined with the low impact, shear cutting action means they have an extremely ...
Эта инструкция также подходит к моделям:Рубанки - JWP-15HH (176.67 kb)