Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Product specification and design are subject to change without notice. Preface AATA International is an innovative and dynamical company, specialised in stair climbing equipment. Stairrobots are active in over 30 countries worldwide. This manual is written for machine operators and for technician who take care for the maintenance of the machine. Although the tiniest details are not set out, the manual is a useful help for people who are dealing with the machine on a daily basis. The stairrobot SR 1750 HE has been used for over 20 years by many well known companies and transport contractors worldwide who are involved in the movement of heavy loads into and out of customers premises. The stairrobot SR 1750 HE is designed to carry unit loads weighing up to 1000 kg up- and down stairs. The accessory equipment, stair approach ramp, manoeuvring dolly and the turntable, have been designed to assist the movement up to and onto the stairs and the take off from the top and journey to the final destination. This manual should be used in conjunction with the cd-rom instruction video, which is placed on the inside of the manuals cover. Read this manual and view the instruction cd-rom carefully before putting the SR 1750HE into operation. Always take note of the safety rules as mentioned in chapter “safety”. A copy of this manual should be kept with the machine, so the operator has it at his disposal. AATA International b.v. Table of contents Preface…………………………………………………………………………………………… 3 Table of contents .……………………………………………………………………………… 4 Survey of standards……………………………………...……………………………………… 5 Survey of standards………………………………………………………………………...…… 5 1. Technical data…..………………..………………………………………………………… 6 2. Description main components stair robot SR 1750 HE 2.1 Drive………………………………………………………………………………… 7 2.2 Transmission and brake………………………………………………………….. 7 2.3 Tracks………………………………………………………………………………. 7 2.4 Controls…………………………………………………………………………….. 8 2.5 Hydraulic levelling platform………………………………………………………. 8 2.6 Descent adjuster ………………………………………………………………….. 9 2.7 Hydraulic motor and Pump 3. Ancillary equipment 3.1 Loading ramp……………………………………………………………………………10 3.2 Turntable…………………………………………………………………………………11 3.3 Winch …………………………………………………………………………………..11 3.4 Dolly .…………………………………………………………………………………….11 4. Safety 4.1 General safety precaution……………………………………………………………...12 5. Operators procedure 5.1 Pre-use inspection…………………………………………………………………….. 14 5.2 Loading…………………………………………………………………………………. 15 5.2.1 The correct position of the load…………………………………………….15 5.2.2 Loading procedure ……………………………………………………… …16 5.3 Ascending………………………………………………………………………………..17 5.4 Descending ……………………………………………………………………………18 5.5 Unloading ………………………………………………………………………………19 6. Trouble shooting chart………………………………………………………………………20 7. Track replacement …………………………………………………………………………22 8. Electrical system chart………………………………………………………………………24 9. Hydraulic system chart …………………………………………………………………… 25 10. Parts………………………………………………………………………………………… 26 10.1 Parts list……………………………………………………………………………… 27 11. CD-rom video……………………………………………………………………………… 28 Survey of standard We declare that the construction of the stairrobot SR1750HE is according to the provisions of EC-Directives 89/392/EWG. Applied harmonized standard: NEN-EN 60034-5; NEN 10034-6; NEN 10072-2 Applied national standards, directives and technical specifications: IEC 34-5; IEC 34-7; IEC 72-1 Survey of symbols Not (or not completely) observing the operating instructions can lead to serious accidents or damage Danger as a result of electric tension 1. Technical data SR 1750 HE Description Value Units Speed 3 Metres p/minute Lifting capacity max. 1000 Kg. Maximum angle Max. 45 . Degrees Weight 175 Kg. Weight including standard accessories 232 Kg. Colour ~~ ~~ Length 1185 Mm Width 720 Mm Height 320 Mm Length loading ramp 1180 Mm Width loading ramp 720 Mm Drive-motor: single phase low noise AC Thermal cut-out Drive-motor capacity 0,75 KW 1 Hp Drive-motor power 220 or 110 V Hydraulic-motor: single phase low noise AC with thermal cut out Hydraulic-motor capacity 0,375 KW 0,5 Hp Hydraulic-motor power 220 or 110 V Hydraulic-pump: built directly on the hydraulic Motor Hydraulic-pump capacity 0,8 ltr/per minute Action pressure max. 100 Bar Capacity oil tank 0,5 Ltr Control: remote control manually operated 4-button switch 24 V Mains 220/110 V 50 Hz Extension cord (cupper wire) 3x2,5 Mm2 Extension cord length 25 Mtr 2 Description main components stairrobot SR 1750 HE 2.1. Drive • Single phase low-noise AC motor with thermal cut-out 2.2. Transmission and brake • Worm-gearbox built directly onto the driving motor • The worm-wheel reduction forms an affective brake for the (loaded) StairRobot on the staircase 2. 3. Tracks • Internally and...