(ENTER)SEL or ENTER2 move to AM Tuner ChannelsU (UP) or U (DOWN)­(PAUSE) or .(STOP)1 ActionFrom Front PanelFrom Remote This set up allows you to preset up to 20 FM tuner channels for fast access. This is for your convenience only and need not be performed unless you wish to. Refer to Manual / Seek tuning for AM Tuner above Stereo/Mono -Programming a channel to Stereo will play the channel in stereo if it is broadcast in stereo or in mono otherwise. Programming a channel to Mono will force the ch

Check that you are in USER PREFERENCE SETUP and that the remote is in AUDIO mode. EDIT PRESET OPTIONS Full Edit Preset No )8//(',712 USER PREFERENCE SETUP 1 Edit Preset Options2 Edit Source Names 3 Display options4 Surround Modes move to new line select menu pageprevious page (',7237,216­ . SEL MENU adjust parameterprevious page ¬® MENU return to USER PREFERENCE SETUP MENUMENU4 choose optionVOLUME KNOB.(REW) or.(FF)3 activate EDIT PRESET OPTIONS. (ENTER)SEL or ENTER2 move to Edit Preset OptionsU

You can’t directly record Dolby Digital onto mini disc or digital compact cassette since these devices add their own compression, which is incompatible with the Dolby Digital compression. Not all Dolby Digital recordings will include all five channels, and, in fact, it is common on DVDs to have two channel Dolby Digital with or without Pro Logic processing. Sound will normally come from all seven speakers in your system, but your receiver can produce sound in one (mono) to seven channels (see “A

Replace only with same type and value. Note: the voltage label located on the AC fuse holder cover plate. 2. AC input receptacle - For attaching the supplied AC power cord to the receiver. 3. IEEE 1394 input (optional) For future interface applications. 4. Control outs - Outputs that allow you to remotely control external devices. (See “Making The Connection“). 5. IR in - Accepts input from external IR receptors. Connect an IR repeater (“home run”) to IR IN for controlling the receiver. This met

• If you might expand your audio/video system later, keep these ideas in mind as you plan current cable runs. • To provide the best tuner reception, make sure the antenna is at least several feet away from the receiver and any other equipment that may produce high frequency interference such as Personal computers, CD players, halogen lamps, etc. Take a look at the back panel of the receiver. You will notice that the RCA-type audio input and output connectors are identified by colors, red for rig

Reference 20 Plus A/V System Controller Owner’s Manual 13258 11/01 USER INFORMATION SETUP CROSSOVERS + LFE 1 Crossover Hz 2 High Pass dB 3 Low Pass dB 4 Peak Limiter dB 5 LFE Level dB 6 DTS LFE Mode 7 Subwoofer Phase next item adjust MENU setup speakers SETUP SPEAKER LEVELS 1 Left Front dB 2 Center dB 3 Right Front dB 4 Right Surround dB 5 Right Surr Back dB 6 Left Surr Back dB 7 Left Surround dB 8 Subwoofer dB next item adjust MENU setup speakers SETUP SPEAKER SIZE 1 Front 2 Center 3 Surround 4

9812C B&K Components, Ltd., 2100 Old Union Road, Buffalo New York 14227-2725 Phone (716)656-0026, Fax (716)656-1291, E-mail: info@bkcomp.com B&K Components, Ltd., 2100 Old Union Road, Buffalo New York 14227-2725 Phone (716)656-0026, Fax (716)656-1291, E-mail: info@bkcomp.com TABLE OF CONTENTS Acknowledgments ............................................................................... 1 Safety Precautions .............................................................................. 2 Features

Users with large front speakers may wish to use them with a subwoofer for movies to keep the extreme bass contained in some movies out of their front speakers. However, they may wish to use their front speakers as full range speakers when listening to stereo music material. If this is your case then set STEREO OPERATION to LARGE. We do not recommend using the LARGE setting if you use small, satellite or bookshelf speakers as the bass information even in stereo music may damage the speakers at hi

MENUMENU8 repeat until bass accentuation is reducedrepeat 1 - 6repeat 1 - 67 set to desired notch widthVOLUME KNOB.(REW) or.(FF)6 move to Notch WidthU (UP) or U (DOWN)­(PAUSE) or .(STOP)5 set to desired notch levelVOLUME KNOB.(REW) or.(FF)4 move to Notch LevelU (UP) or U (DOWN)­(PAUSE) or .(STOP)3 set to desired notch frequencyVOLUME KNOB.(REW) or.(FF)2 move to Notch FrequencyU (UP) or U (DOWN)­(PAUSE) or .(STOP)1 ActionFrom Front PanelFrom Remote 7(6. 721. 2). 34 p/n 12858 Rev. 0717A Setup vari

0717A Set Zone 2 (B) product ID - Each message transmitted from your remote includes a Product Code, identifying the manufacturer, and Zone product ID code from 1 to 16. The product ID code allows multiple B&K products to be controlled from the same remote. Your receiver actually uses two product ID codes -one for Zone 1 (A) (normally set to ID code 1) and the other for Zone 2 (B) (normally set to ID code 2). If you have a system with multiple B&K products then you may wish to set the Zone produ