Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
New Technology The CAMCO Q-Power 10 introduces new class D amplifier technology offering smooth and responsive handling with massive power output while maintaining CAMCO’s famous sonic integrity, the CAMCO Q-Power 6 uses class H technology, both models benefiting from the latest advances in CAMCO’s SMPS technology, the resulting high power, lightweight units are at home in all professional applications. Designed for flexibility of Use With the introduction of the Q-Power series CAMCO aim to deliver simple, pure and reliable power for applications where cost and ease of use are paramount without lose of integrity. Straight Forward Approach CAMCO have paid attention to market requirements for a straight forward approach. In introducing the Q-Power Series CAMCO identified, key elements, such as power output, loading, AC power supply flexibility and connectivity. The result is two, outstanding power output options, across four channels, in a 19” 2 RU rugged case design, suitable for professional Installations, Theatre and Live Sound applications. Features § Dual Voltage SMPS with automatic voltage selection for 120 V / 230 V operation § Two temperature controlled cooling fans § Two switchable peak-limiter for channel A+B and C+D § 100 V/70 V (Q-Power 10), 70 V (Q-Power 6) line operation § CAMCO Switch Mode Power Supply technology § 2500 W (Q-Power 10) / 1500 W (Q-Power 6) max RMS output at 4 . per channel 6 Years Warranty CAMCO amplifiers renowned reliability is backed up by 6 years warranty from date of first purchase. Along with ABCD channel identification, clear LED status indicators above each potentiometer indicate; Amp on, Signal present (this is red if in protect mode), Output current and clip status, all information is clear and precise. A gain control security cover is also provided. Flexible connectivity as standard; the input section is supplied with both XLR and Phoenix connectors, while the output section is supplied with both Speakon and Barrier Strip connectors with cover. Gain Setting (26 dB, 32 dB, 1,4 V) Input Channel C Input Channel B Channel A & B output Channel C & D output Input Channel D Input Channel A OFFSLOWFASTCLIP LIMITER26 dB1,4 V32 dB26 dB1,4 V32 dBDCBA:LEDOM:PMI/HCREPRWPTUPTUOYNAMREGNIEDAM:.ON.RESDABCDo not remove this cover or connect any loudspeaker cables while the amplifier is running! See the manual for detailed cabling instructionsWarning! Risk of electrical shock. DCBADCBA:LEDOM:PMI/HCREPRWPTUPTUOYNAMREGNIEDAM:.ON.RES Input Channel D & C Input Channel B & A Channel D, C, B & A output (barrier strip) Clip Limiter Channel D & C (Off, On) Clip Limiter Channel B & A (Off, On) Specifications: Q-Power 6 Q-Power 10 Power per channel All channels driven @ 1kHz, THD < 1% 16 . 470 W 620 W 8 . 800 W 1100 W 4 . 1000 W 1800 W 4 . Max RMS 1500 W 2500 W 70 V line operation 950 W 1600 W 100 V line operation N/A 625 W Power per channel Single channel driven @ 1kHz, THD < 1% 16 . 480 W 620 W 8 . 960 W 1350 W 4 . 1500 W 2400 W 4 . Max RMS 1600 W 2600 W No. of channels 4 4 Max. Output Voltage 125Vp / 250Vpp 145Vp / 290Vpp Output Circuitry Class H Class D Signal To Noise-Ratio 20 Hz - 20 kHz, 8 . load > 115 dB (A-weighted) > 112 dB (unweighted) > 115 dB (A-weighted) > 112 dB (unweighted) THD+N (typical) 20 Hz - 20 kHz, 8 . load, 6 dB below rated power < 0,01 % < 0,01 % SMPTE 4:1 (typical) 60 Hz + 7kHz, 8 . load 8 dB below rated power < 0,01 % < 0,02 % Damping Factor 8 . load, 1 kHz and below > 350 > 600 Net Weight 10,6 kg / 23,4 lbs 11,5 kg / 25,4 lbs Shipping Weight 12,6 kg / 27,8 lbs 13,5 kg / 29,8 lbs Frequency Response 8 . load, 1 dB below rated power 20 Hz - 20 kHz ± 0,15 dB Input Impedance 15 k. balanced Input Gain selectable: 26 dB, 32 dB or 1,4 V input sensitivity Protection Circuits inrush-current limitation, protection circuits against power on/off transients, temperature monitoring of transformers and heat-sinks, output DC protection, power transistor control, temperature dependent SOA protection, intelligent mains fuse protection Limiter two switchable peak-limiter for channel A+B and C+D respectively Fan 2 temperature dependent speed-controlled axial fans Indicators LED’s for ON, SIGNAL/PROTECT, CLIP, Output Current Input Connectors 3-pin XLR, male and female per channel, pin 2 = in phase / Phoenix Connectors, pin 1 = in phase, pin 2 = GND Output Connectors Two 4-pole SPEAKON connectors / Barrier Strip with protection cover Operation Voltage Dual Voltage SMPS with automatic voltage selection for 120 V / 230 V operation Dimensions (WxHxD) 483 x 88,9 x 419 mm / 19 x 3,5 x 16,5 inches (19”, 2U) Shipping Dim. (WxHxD) 600 x 105 x 527 mm / 23,3 x 4,1 x 20,7 inches Accessories included Gain pot security cover Specifications subject to technical alterations without prior notice. ...