Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The buffered input provides for a local monitor loop through and main output for onward connection to monitors, projectors and plasma displays. The main output features 75 ohm drive for connection to long cable runs and TTL sync restore for total compatibility. Activity LED green = signal source present red = unit powered but not connected to RGBHV source |— Monitor IN Audio IN-(front) (rear) Video OUT FIG. 1 Solecis AVB-DA-RGBHV-ST-0102 Product Specifications Audio OUT- AVB-DA-RGBHV-ST-0102 Specifications | RGB Input (HD-15) | Number: 1 Level: Analog Max Level: 1V p-p Impedance: 75 ohm | Sync Input | Type: Analog or TTL Impedance: 470 ohm RGB Video Bandwidth: 300MHz -3dB RGB Return Loss: -45dB@10MHz, -27dB@100MHz Sync Processing: None | RGB Outputs (HD-15) Number: 2 Level: Analog Gain: Unity Impedance: 75 ohm | Sync Output | Level: TTL Gain: TTL restore Impedance: 75 ohm Audio: Balanced/Unbalanced audio via 3.5mm stereo socket to phoenix AVB-DA-RGBHV-ST-0102 Specifications (Cont.) | Power | Input Voltage: 9-12VDC Power Consumption: 3W Heat Dissipation: 10.2 BTU/hr Dimensions (HWD): • 1.66” x 5.85” x 4.25” • 42.2mm x 148.6mm x 108.0mm Weight: 1.5 lbs. (0.68kg) Included Accessories: PS2.8 power supply (FG423-11) Certifications: • CE • FCC class B, part 15 • RoHS/WEEE compliant Safety Instructions Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment. Liquid Spills Do not set drinks on top of the unit or immerse the unit in liquid. Do Not Disassemble This device contains no user serviceable parts. All servicing must be performed by a qualified service technician. For Safety Reasons • Do not place the unit on an unstable surface. • Do not use near water or sources of heat. • Use only recommended attachments. • Use the type of power supply as specified. Unplug the power to the unit and refer servicing to qualified personnel under the following conditions: • If liquid has been spilled or the unit has been exposed to rain or water. • If it does not operate normally when the operating instructions are followed or if it exhibits a distinct change in performance indicating a need for service. • If the unit has been dropped or the cabinet damaged. Connections Connect the RGBHV and Audio sources to the Input sockets on the front panel of the unit. • The RGB inputs are 75 ohm terminated and the audio input 47Kohm terminated. The video outputs are fully 75 ohm driven and the audio balanced. • For unbalanced systems use the + and Gnd terminals. Note: It is imperative that the input sources are fully compatible with the display and sound devices. The unit may now be powered. Power / Video Indication ("Active" LED) • When the unit is powered without the RGBHV input connected, the Active indicator will be Red. • When a signal source is applied, the indicator will turn Green. Video Pin Connections FIG. 2 provides the pin layout for the HD-15 connectors: © © © © © ™ ® -fU 0 '6)/ >¡15 <13'; :.12; <11'; FIG 2 RGBHV HD-15 connector The pin configuration for the HD-15 (video) connector are as follows: 1 - RED 2 - GREEN 3 - BLUE 4 - n/c 5 - n/c 6 - RED GROUND 7 - GREEN GROUND 8 - BLUE GROUND 9 - n/c 10 - SYNC GROUND 11 - n/c 12 - n/c 13 - H SYNC 14 - V SYNC 15 - n/c For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 6/09 ©2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • 93-1340-1101-02 REV: E 93-1340-1101-02...