Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
With video bandwidth exceeding 350 MHz (-3dB) the AVB-DA-RGBHV-0103 is ideal for all RGBHV, RGBS, RGsB and YUV type signals. The AVB-DA-RGBHV-0103 can be used as a composite video distribution amplifier and the terminated inputs and 75 ohm driven outputs make it excellent for connection to long cable runs. The AVB-DA-RGBHV-0103 is housed in a metal enclosure and is powered by the supplied external power adaptor. (front) Video OUT 3- Video OUT 1 —I FIG. 1 Solecis AVB-DA-RGBHV-0103 Common Application Great for delivering up to three outputs over long cable runs. Product Specifications (rear) AVB-DA-RGBHV-0103 Specifications RGB Input (BNC) Number: 1 Level: Analog Max Level: 1V p-p Impedance: 75 ohm Sync Input Type: Analog or TTL Impedance: 75 ohm RGB Video Bandwidth: 350MHz -3dB RGB Return Loss: -45dB@10MHz, -28dB@100MHz Adjacent Channel X-talk: -70db@10MHz, -50dB@100MHz RGB Outputs (BNC) Number: 3 Level: Analog Gain: Unity Impedance: 75 ohm Sync Output Level: TTL Impedance: 75 ohm Power Input Voltage: 9-12VDC Power Consumption: 8 W Heat Dissipation: 27.3 BTU/hr AVB-DA-RGBHV-0103 Specifications (Cont.) Dimensions (HWD): 1.86” x 9.10” x 4.50” 47.2mm x 231.1mm x 114.2mm Weight: 3.3 lbs (1.5 kg) Included Accessories: PS4.4 power supply (FG423-44) Certifications: • CE • FCC class B, part 15 • RoHS/WEEE compliant Safety Instructions Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment. Liquid Spills Do not set drinks on top of the unit or immerse the unit in liquid. Do Not Disassemble This device contains no user serviceable parts. All servicing must be performed by a qualified service technician. For Safety Reasons • Do not place the unit on an unstable surface. • Do not use near water or sources of heat. • Use only recommended attachments. • Use the type of power supply as specified. Unplug the power to the unit and refer servicing to qualified personnel under the following conditions: • If liquid has been spilled or the unit has been exposed to rain or water. • If it does not operate normally when the operating instructions are followed or if it exhibits a distinct change in performance indicating a need for service. • If the unit has been dropped or the cabinet damaged. Connections PC Source Connect the PC source to the Input socket on the rear panel of the unit and connect monitors, projectors etc to the Output sockets. • The PC video input is 75 ohm terminated. • The PC video outputs are fully 75 ohm driven for connection to long cable runs. Note: It is imperative that the input source is fully compatible with the display device. Power • Connect the supplied power pack to the power socket on the unit. • Connect the power supply to a MAINS source. The power LED on the front of the unit will light and the input signal will be present on all 3 outputs. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 6/09 ©2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • 93-1340-3403-01 REV: D 93-1340-3403-01...