Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
TN PN Requirement Location 3517 240 volts, 50 hertz United Kingdom 3516 230 volts, 50 hertz Europe 3518 120 volts, 60 hertz USA/Canada/Mexico 3514 100 volts, 50-60 hertz Japan 3515 240 volts, 50 hertz Australia CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Der Anschluss dieses Gerates an ein offentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstosst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/Angleichung der Rechtsvorschriften der Mitgliedstaaten uber Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformitat. Compliance Information UL Listed CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits to part 15 of the FCC rules. These limits are designed to provide reasonable protection against interference when the equipment is operated in a commercial This equipment generates, uses, and can radiate radio frequency energy and, if not instruction manual, may cause harmful interference to Operation of this equipment in a residential area is likely to cause harmful required to correct the interference at the user’s Canadian Regulations This digital apparatus does not exceed the the radio interference regulations of the European Regulations Warning This is a Class A product. In case the user may be required Copyright Restrictions © 1997 TRANSITION All rights reserved. No part of this – graphic, electronic, Trademark All 33021. Minneapolis, MN 55344 USA 25/155 Mb/s ATM Copper-to-Fiber Media Converter A-CF-01, A-CF-01(SM) USER’S GUIDE The TRANSITION Networks ATM (Asynchronous Transfer Mode) copper-tofiber media converters connect twisted-pair copper cable network segments to multimode fiber optic cable network segments (using A-CF-01) OR to singlemode fiber optic cable network segments (using A-CF-01(SM)). UTP A-CF-01 Fiber The ATM media converters provide network connection pair ATM connector and a set of RX (receive) and connectors. NOTE: Effective cable distances are and by signal loss in the cable. The fiber connection, resistance to radio frequency noise, allows devices. Twisted-pair runs are best kept integrity. Status LEDs on the connector side information: Pwr (Power) Illuminated green LED indicates connection to external AC power. LinkCopperFiber Activity Fiber Copper Activity (Fiber) Steady green indicates Activity (Copper) Steady A-CF-01 straight-through crossover <100 meters <100 meters 25 Mb/s or 155 Mb/s ATM Switch 2 kilometers - multimode 20 kilometers - singlemode Straight Through/Crossover Cable Requirements and Pin Specifications Crossover CableStraight Through Cable Fileserver Be certain that the twisted-pair cable is configured 1 2 7 8 1 2 7 8 The two active pairs in an Twisted Twisted ATM network are pins 1 & 2 and pins 7 & 8. Use only correctly (straight through or crosso...
Эта инструкция также подходит к моделям:Ресиверы и усилители - MEDIA CONVERTER A-CF-01(SM) (44.49 kb)