Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Refer to “2: Connecting the monitor” in the operating instructions. 2 Turn on the receiver and the TV. Switch the input of the TV so that an image of the menu is displayed. 3 Press MENU. The menu is displayed on the TV screen. 4 Press ./. repeatedly to select “ Settings,” then press or .. The Settings menu list appears on the TV screen. 5 Press ./. repeatedly to select “Auto Calibration,” then press or .. 6 Press ./. repeatedly to select “Quick Setup,” then press . The screen on which you can select the item to be measurered appears. 7 Press ./. repeatedly and to un-check the items you do not want to measure, then press .. The confirmation screen, asking whether you are ready to start measurement, appears. 8 Press to select “Start.” The measurement starts in five seconds. When the measurement ends, a beep sounds and the measurement result appears on the TV screen. 9 Press to select “Next.” 10 Press ./. repeatedly to select “Yes,” then press . The selecting screen of the calibration type appears. . . . . . . 11 Press ./. repeatedly to select the auto calibration type, then press . Parameter Explanation Full Flat Makes the measurement of frequency from each speaker flat. Engineer Sets the frequency to one that matches that of the Sony listening room standard. Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. User Reference Sets the frequency to one that you adjusted using the Setup Manager application software. This parameter appears only if you adjusted the frequency using the Setup Manager application software. OFF Sets the auto calibration EQ to off. The measurement results are saved. 12 Press .. The exit screen appears. 13 Press . When error codes appear When “Save auto calibration (auto speaker setup)?” appears on the TV screen in step 9, you can select whether to confirm the warning (“Yes”) or not (“No”). Follow the instructions of the TV screen when you select “Yes.” For details on warning and error codes, see “Message list after auto calibration measurement” in “10: Calibrating the appropriate speaker settings automatically (Auto Calibration)” in the operating instructions. Tip The size of a speaker (LARGE/SMALL) is determined by the low characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. To select the language displayed on the TV screen You can select the language to be used for messages on the TV screen from 4 languages. English Espanol Francais Deutsch For details, see “ System settings” in the operation instructions. Setting up other components You should set up each component so that take out sound is output from speakers correctly when you pl...