Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
(Some EU member states may have different deadlines.) Equipment that complies with the EU directive will be marked with a WEEE-compliant emblem, as shown in the figure below. Please insure that this equipment is properly recycled at its end-of-life. Algolith invites you to contact your local or regional waste administration if you need any information on how to dispose of this equipment in an environmentally friendly and health conscious manner. 3 XVC-1001-DC Guide to installation and operation Introduction Overview The Algogear™ XVC-1001-DC Downconverter provides high quality conversion from HD (SMPTE 292M) video formats such as 720p50, 720p59.94, 1080i50, and 1080i59.94 to SD (SMPTE 259M-C) video formats such as 480i59.94 and 576i50. It offers advanced de-interlacing and directional content adaptive scaling for superior conversion quality. Standard and custom aspect ratio conversion and HD to SD color space conversion are also supported. It supports minimum or variable delay of the video output relative to the reference input. The XVC-1001-DC can automatically delay all 16 channels (4 groups) of embedded audio to compensate for the video delay. Main Features • High quality HD to SD downconversion • Advanced motion adaptive video de-interlacing • Directional content adaptive scaling • Custom and fixed aspect ratio conversion settings • Supports minimum or variable delay of video output relative to reference • Support synchronous 16 channels (group 1 to 4) of 48 KHz audio (PCM 20-bits and 24-bits) • Demultiplexing and multiplexing of audio data • Perfect audio/video synchronization • SNMP Support • Controlled by easy-to-use Dashboard software 4 Guide to installation and operation XVC-1001-DC The Algogear Series Designed for openGear, Algogear is a flexible, future-proof, modular solution that can maximize bandwidth, clean, synchronize and scale media. Algogear delivers unparalleled value and flexibility to broadcasters leveraging the Algogear solution, giving the ground-breaking ability to reprogram the cards with any of the available Algogear solutions at any time, at no cost. If you have a simple configuration that will change as your needs evolve, you can continue to change the functionality of the Algogear cards, reconfiguring them to meet your needs over time. The list of Algogear applications is quickly evolving. Visit for a current list of available applications and news about products coming soon. Card Identification Rear module labels and card identification labels for each Algogear application available at the time of purchase are included with your card. In addition, an installation CD is provided which includes the user guides of all Algogear applications available at the time of purchase. To request additional rear module labels, card identification labels and user guides email us at sales@algolith.com. See the «How to Repurpose your Algogear Card» section of this manual for more information (page 27). 5 XVC-1001-DC Guide to installation and operation Installation and setup Static Discharge Whenever handling the XVC-1001-DC and other related equipment, please observe all static discharge precautions as described in the following note: Static discharge can cause serious damage to sensitive semiconductor devices. Avoid handling circuit boards in high static environments such as carpeted areas, and when wearing synthetic fiber clothing. Always exercise proper grounding precautions when working on circuit boards and related equipment. Board Installation Use the following procedure to install the XVC-1001-DC in an openGear (DFR-8310-N) distribution frame with cooling fans: Due to power consumption and heat dissipation requirements, the XVC1001- DC must only be installed in a frame with the cooling fan option installed. 1. Refer to the User Manual of the openGear 8300 series frame to ensure that the frame is properly installed according to instructions. 2. A maximum of 8 XVC-1001-DC or other Algogear cards can be installed in the DFR-8310 series frame. Do not populate the openGear frame with more than 8 Algogear cards. Attempting to do so may damage the cards, the frame or both. 3. After selecting the desired frame and installation slot, hold the XVC-1001-DC card by the edges and carefully align the card edges with the slots in the frame. Then fully insert the card into the frame until the rear connection plugs are properly seated on the midplane and rear modules. 6 Guide to installation and operation XVC-1001-DC Installation and setup The XVC-1001-DC card is installed in the openGear frame. openGear frame The XVC-1001-DC card requires a BNC rear output module. Depending on the frame model you have purchased, your frame may be equipped with a fixed 100 BNC rear panel. openGear frame with a fixed 100 BNC rear panel Your frame model may have a modular rear panel, to accommodate different types of cards. You will then need to purchase and install a 10 BNC single rear module for each XVC...