Оценок - 4, средний балл: 4.3
(
)
)
|
Фото и характеристики Sony STR-DA5000ES |
К этому устройству также есть другие инструкции:
Ресиверы и усилители - STR-DA5000ES (1.58 mb)
Ресиверы и усилители - STR-DA5000ES (1.67 mb)
Ресиверы и усилители - STR-DA5000ES (3.06 mb)
Ресиверы и усилители - STR-DA5000ES (4.63 mb)
Фрагмент инструкции
A Audio cord White (L) Red (R) B Audio/video cord Yellow (video) White (L/audio) Red (R/audio) C Video cord Yellow D S-video cord E Optical digital cord Notes F Coaxial digital cord G Monaural audio cord Black Tip Audio cord A can be torn into two monaural audio cords G. H Component video cord Green Blue Red Getting Started • Turn off the power to all components before making any connections. • Be sure to make connections firmly to avoid hum and noise. • When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red. • When connecting optical digital cords, insert the cord plugs straight in until they click into place. • Do not bend or tie optical digital cords. If you have Sony components with CONTROL A1II/CONTROL S jacks See “CONTROL A1II Control System” on page 54. 7GB 8GB . Hooking up a DVD player, TV monitor, or satellite tuner For details on the required cords (A–H), see page 7. 1 Connect the audio jacks. * Connect to either the DVD COAXIAL IN or the DVD OPTICAL IN jack. We recommend making connections to the DVD COAXIAL IN jack. Note You can listen to the sound of your TV by connecting your TV’s audio output jacks to the TV/SAT AUDIO IN jacks on the receiver. In this case, do not connect the TV’s video output jack to the TV/SAT VIDEO IN jack on the receiver. 1a: Connecting components with digital audio output jacks SURROUND BACK SPEAKER SURROUND SPEAKERS CENTER SPEAKER FRONT SPEAKERS CTRL A1 DIGITAL COMPONENT VIDEO AUDIO VIDEO S2 VIDEO VIDEO S2 VIDEO IN IN AUDIO VIDEO S2 VIDEO IN AUDIO VIDEO S2 VIDEO IN AUDIO VIDEO S2 VIDEO CENTER IN IN IN OUT MONITOR OUT TV/SAT IN DVD IN SURR BACK CENTER FRONT SURROUND SUB WOOFER SUB WOOFER FRONT SURROUND ASSIGNABLE DVD COAXIAL IN CD/SACD COAXIAL IN DVD OPTICAL IN TV/SAT OPTICAL IN CD/SACD OPTICAL IN MD/DAT OPTICAL IN MD/DAT OPTICAL OUT OUT AUDIO VIDEO S2 VIDEO OUT IN OUT AUDIO VIDEO S2 VIDEO SIGNAL GND PHONO CD/SACD MD/DAT TAPE AUDIO OUT SUB WOOFER TV/SAT DVD VIDEO 2 VIDEO 1 PR/CR /R-Y PR/CR Y /B-Y PR/CR Y /R-Y PR/CR Y /R-Y PR/CR /B-Y PR/CR /B-Y R L R L R L R L A B MONITOR OUT IMPEDANCE USE 4-16 FM AM U MULTI CHANNEL INPUT 2 75 COAXIAL ANTENNA MULTI CHANNEL INPUT 1 DIGITAL OPTICAL DIGITAL COAXIAL F* E* A E A R AUDIO OUT L T R AUDIO OUT L T DIGITAL OPTICAL Satellite tuner DVD player Getting Started 9GB 2 Connect the video jacks. The following illustration shows how to connect a TV or satellite tuner and a DVD player with COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component video input jacks allows you to enjoy higher quality video. You can upconvert the video signals, and adjust the hue, etc. of the converted signals (page 43). Notes • On this receiver, standard video signals can be converted to comp...
Эта инструкция также подходит к моделям:Ресиверы и усилители - STR-DA3000ES (1.57 mb)