Оценок - 2, средний балл: 4 ( )

Производитель: Sony Размер: 1.01 mb Название файла: Язык инструкции:

5 Click the IR code you want. The name of the IR code appears in the highlighted macro step number and the highlight moves to next macro step number. 6 Repeat steps 4 and 5 to enter up to 8 IR codes. To erase an entered IR code 1 Click the code you want to erase. 2 Click ?or /repeatedly until NO SET appears at the right of the screen. 3 Click NO SET. Note The ALL OFF command is not available for the Macro Play selected for Auto Start. Starting a Macro Play Click FUNCTION in the main menu, then click MACRO 1 or MACRO 2. The specified IR codes start automatically. TAPE DAT / MD CD TUNER PHONO MACRO 2SOUND SETUP FUNCTION VIDEO 1 VIDEO 2 VIDEO 3 L D / DVD TV / DBS MACRO 1 EXIT You can start a Macro Play automatically when you turn on the receiver by selecting a Macro Play in the Auto Start function (see page 44). Additional Operations and Settings Additional Operations and Settings Adjusting the Sensitivity of the Remote You can select from five sensitivity levels that determine the speed at which the pointer moves. 1 Click SETUP in the main menu to display the SETUP menu, then click OSD SETUP. 2 Click FEELING 1 to 5 to select the sensitivity level you want. The higher the number, the faster the speed. OSD SETUP AUTO PLAY IR OUTPUT AUTO OSD ERASE SEE-THROUGHLANGUAGE POINTER ONLY DEMO FEELING OSD POSITION OFF ON OFF ON OFF ON OFF ENGLISH SET 1 2 3 4 5 START EXIT ON SET RETURN Changing the Display Settings Selecting the display parameters You can select the display modes (AUTO OSD ERASE, POINTER ONLY or DEMO) and the display type (SEETHROUGH or LANGUAGE). You can also switch the IR OUTPUT setting when you connect the IR repeater. 1 Click SETUP in the main menu to display the SETUP menu, then click OSD SETUP. 2 Select the display parameters you want to change. OSD SETUP AUTO PLAY IR OUTPUT ON OFF AUTO OSD ERASE ON OFF SEE-THROUGHON OFF LANGUAGE ENGLISH POINTER ONLY SET DEMO START FEELING OSD POSITION 1 2 3 4 5 EXIT SET OFFON RETURN • To select the display mode, click AUTO OSD ERASE (ON or OFF), POINTER ONLY (SET) or DEMO (START). AUTO OSD ERASE: This display mode is useful during LD player operations since it allows you to see chapter numbers that otherwise might be hidden by the control panel. When this mode is on, control panels disappear whenever you click and hold down the direction control button on the remote. When you release the button, the control panel reappears. POINTER ONLY: This display mode allows you to use the pointer to point to various on-screen items, such as during a presentation (etc.). When you click POINTER ONLY SET, the on- screen display disappears except for the pointer and an EXIT button. To freeze the pointer, hold down the direction control button on the remote. DEMO: This display mode activates a program that explains the various functions of the receiver. Note that when the program is running, it replaces previously stored data (such as surround sound parameters) with data from the program. Click START to activate the program. To stop the program, press any button on the remote or receiver. Additional Operations and Settings Additional Operations and Settings • To select the display type, click SEE– THROUGH (ON or OFF) and LANGUAGE (ENGLISH, FRENCH or GERMAN). SEE-THROUGH: When set to OFF, the display appears in the factory–set color. When set to ON, all menus and control panels are transparent, with only characters and outlines visible, allowing you to see the contents of video programs. LANGUAGE: This setting lets you specify the language appearing in the on-screen display and the display on the front of the receiver. You can choose between three languages: English, French and German. • To switch the IR OUTPUT setting, click IR OUTPUT ON or OFF. When it is set to OFF, the IR signals are output only from the IR OUT jack on the rear panel. No IR signals will be output from the IR emitter on the front panel. When the IR OUTPUT is set to OFF, “IR OFF” appears in the main menu. Normally, IR OUTPUT should be set to ON. Note Even if you have selected SEE-THROUGH ON, the display changes to the factory set color when there is no video signal being input. When a video signal is input, the display reverts to SEE-THROUGH ON. Adjusting the position of the on-screen display You can adjust the overall position of the on-screen display control panel. 1 Click SETUP in the main menu to display the SETUP menu, then click OSD SETUP. 2 Click OSD POSITION SET. The position adjustment screen appears. OSD SETUP AUTO PLAY DEMO IR OUTPUT SEE-THROUGH FEELING LANGUAGE AUTO OSD ERASE POINTER ONLY OFF ON OFF ON OFF ON OFF ENGLISH SET 1 2 3 4 5 START EXITRETURN ON OSD POSITION SET 3 Click the borders to adjust the position so you can just see the top, bottom, right and left edges of the border. V B b v EXIT Additional Operations and Settings Additional Operations and Settings Using the Sleep Timer You can set the receiver to turn off automatically at a time you specify. 1 Click SETUP in the main menu to display ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: