Оценок - 3, средний балл: 5 ( )

Производитель: Sony Размер: 879.54 kb Название файла: Язык инструкции:

This operation is only possible when “TV SIZE” in the TV MONITOR SET menu is set to WIDE (see page 17). Selecting a Component Using the Controls on the Front Panel 1EPress POWER to turn on the receiver. 2EPress the button for the component you want to use: To listen to or watch Press Video tapes VIDEO 1, VIDEO 2 or VIDEO 3 Laser discs LD TV programs TV/DBS Digital Audio Tapes (DAT) DAT/MD or MiniDiscs (MD) Analog audio cassettes TAPE MONITOR Compact Discs (CD) CD Radio programs TUNER Records PHONO 3ETurn on the component, for example, a CD player, and start playback. When you listen with headphones Connect the headphones to the PHONES jack and set the SPEAKERS selector to OFF. Basic Operations Basic Operations 6 Click LIST to display the memory list. Tuning and Presetting Radio Stations LIST SUB USER BAND FM 102.50MHz STEREO – + This receiver lets you tune and preset radio stations 7 Click A B C repeatedly to select the page (A, B, or from the on-screen display. You can store up to 30 FM C) where you want to store the station. or AM stations, and recall them later with a simple click. To assign names to the preset stations, see page 35. +–BAND FM 102.50MHz STEREO EXITA B C MEMORY 0 FM 95.50MHz Before you begin, make sure you have: • Connected the RC antenna securely and correctly as indicated on page 9 (STR-DE-905G only). • Connected an FM/AM antennas to the receiver as indicated on page 10. 1 Click FUNCTION in the main menu. 2 Click TUNER . 3 Click BAND to select FM or AM. FUNCTION + – VOL ALL OFF USERSUB S O U N D LIST +–BAND FM 102.50MHz STEREO 4EClick SUB, then click on TUNE MODE MANUAL/ AUTO to select the tuning mode. Select MANUAL for manual station selection. Select AUTO for automatic station selection. FUNCTION + – VOL ALL OFF USER S O U N D LIST +–BAND FM 102.50MHz STEREO EXIT MANUALTUNE MODE AUTO 54321 6 7 8 9 10 A B C SUB 5EClick the + or – icon next to the frequency to tune in a station. 8EClick MEMORY. MEMORY turns red. A 0 B C FM 95.50MHz MEMORY EXIT BAND FM 102.50MHz STEREO– + 9EClick the button (0 to 9) where you want to store the station. The button lights up and the station is stored. 1 FM 102.50MHz ALL OFF2 FM 92.00MHz 3 FM 94.50MHz 4 FM 92.00MHz VOL5 FM 89.50MHz 6 FM 89.50MHz + 7 FM 104.50MHz – 8 FM 101.00MHz 9 FM 96.00MHz 0 FM 95.50MHz A B C MEMORY EXIT BAND FM 102.50MHz STEREO– + 10 Repeat steps 4 through 10 to preset up to 30 stations. During automatic tuning When you tune past either end of the band, the receiver automatically jumps to the opposite end and continues scanning in the same direction. Every time a station is received, the receiver stops scanning. To continue scanning, press the icon again. To change a preset station Preset a new station at the number you want to change. Note If the AC power cord is disconnected for about one week, the preset stations will be cleared from the receiver’s memory, and you will have to preset the stations again. USERLIST +–BAND FM 102.50MHz STEREO SUB To watch FM simulcast TV programs Make sure that you tune in the simulcast program on both the TV (or VCR) and the receiver. Basic Operations Basic Operations Tuning preset stations (preset tuning) 1EClick FUNCTION in the main menu. 2EClick TUNER . 3EClick LIST. 4EClick A B C repeatedly to display the station you want. 5EClick the button (0 to 9) for the respective station. To recall preset stations from the SUB menu 1 Click SUB. 2 Click A B C repeatedly to select the memory page. 3 Click the number of the station you want. Tuning preset stations using the controls on the front panel 1EPress POWER to turn on the receiver. 2EPress TUNER to select “TUNER”. The last received station is tuned in. 3EPress PRESET TUNING +/– to tune in the preset station you desire. Recording This receiver makes it easy to record to and from the components connected to the receiver. You don’t have to connect playback and recording components directly: once you select a program source on the receiver, you can record and edit from the on-screen display as you normally would using the controls on each component. Before you begin, make sure you’ve connected all components properly. Recording component (tape deck, DAT deck, MD deck, VCR) c..c Playback component (program source) .: Audio signal flow c: Video signal flow You can record on a cassette tape, Digital Audio Tape, MiniDisc, or video tape (etc.) using the receiver. See the instruction manual of your recording component if you need help. 1EClick FUNCTION in the main menu. 2EClick the program source you want to record (“LD” for example). 3EClick on SUB. ( ) SUB USER 0 p = + 4EClick REC EDIT. FUNCTION + – VOL ALL OFF S O U N D EXIT SIDE 54321 6 7 8 9 10/0 REC EDIT USER )(0pP=+ A SIDE B +10 (continued)E Basic Operations The control panels for both components appear on the TV screen. “PLAYER” for the source component, and “RECORDER” for the recording component. FUNCTION + – VOL ALL OFF S O U N D RECORDER EXIT TAPE DAT / MD VIDEO 2 VIDEO 1 Basic Operations The control pan...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: