Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Center speaker Front Front speaker (L) speaker (R) Rear Rear speaker (L) speaker (R) • WIDE mode Select WIDE mode if you have front and rear speakers and a large center speaker. With the WIDE mode, you can take full advantage of Dolby Surround sound. Center Front speaker Front speaker (L) speaker (R) Rear Rear speaker (L) speaker (R) • PHANTOM mode Select PHANTOM mode if you have front and rear speakers but no center speaker. The sound of the center channel is output from the front speakers. Front Front speaker (L) speaker (R) Rear Rear speaker (L) speaker (R) • 3 CH LOGIC mode Select 3 CH LOGIC mode if you have front and center speakers but no rear speaker. The sound of the rear channel is output from the front speakers to let you experience some of the surround sound without using rear speakers. Center Front Front speaker speaker (R) speaker (L) Delay time Time lag between the surround sound output from front speakers and rear speakers. By adjusting the delay time of the rear speakers, you can obtain the feeling of presence. Make the delay time longer when you have placed the rear speakers in a small room or close to your listening position, and make it shorter when you have placed them in a large room or apart from your listening position. Direct tuning Tuning method to let you directly enter a station’s frequency using the numeric buttons. Use this method if you know the frequency of the station you want. Dolby Pro Logic Surround Decoding system of Dolby Surround sound standardized in TV programs and movies. Compared with the former Dolby Surround system, Dolby Pro Logic Surround improves sound image by using four separate channels: off-screen audio effects, on-screen dialog, left-to-right panning, and music. These channels manipulate the sound to be heard and enhance the action as it happens on the screen. To take advantage of Dolby Pro Logic, you should have at least one pair of rear speakers and/or one center speaker. You also need to select the appropriate center mode to enjoy a full effect. Dolby Surround Encoding and decoding system of Dolby Surround sound for consumer use. Dolby Surround decodes the extra channels on the Dolby Surround-encoded sound tracks of movie videos and TV programs and produces sound effects and echoes that make the action seem to envelop you. The receiver offers Dolby Surround (PRO LOGIC) as one of the pre-programmed sound fields. If you have rear or center speaker(s), we recommend that you customize the Dolby Surround sound field by selecting the appropriate center mode to take advantage of Dolby Pro Logic Surround sound. Effect level Combination of the level of early reflections and reverberation. You can adjust the effect level in 6 levels. As you select higher levels, the room becomes “live,” and as you select lower levels, the room becomes “dead.” 27ENE Additional Information Memory page Internal memory to store preset radio stations. This receiver provides 3 “pages” (A, B, and C). Each memory page lets you store 10 FM or AM stations; therefore, you can store a total of 30 stations. Parameter Variable of sound that composes sound image, such as tone or delay time. You can customize the pre-programmed sound fields by adjusting parameters to suit your listening situation. Preset station A radio broadcasting station that is stored in memory of the receiver. Once you “preset” stations, you no longer have to tune in the stations. Each preset station is assigned its own preset number, which lets you tune them in quickly. Programmable remote Remote control with “learning” capability. You can control not only Sony components but non-Sony components by programming the control signals of these components. Station index Index name given to preset radio stations. You can group preset stations by assigning the same station index to them. Sound field Sound pattern produced by a sounding source or sources in a given environment due to direct and reflected sounds and the acoustics of the environment. The receiver offers pre-programmed sound fields like, DOLBY SUR, THEATER, and HALL (etc.) to let you enjoy surround sound easily. Surround sound Sound that consists of three elements: direct sound, early reflected sound (early reflections) and reverberative sound (reverberation). The acoustics where you hear the sound affect the way these three sound elements are heard. These sound elements are combined in such a way that you can actually feel the size and the type of a concert hall. • Types of sound ReverberationEarly reflections Direct sound • Transition of sound from rear speakers Direct sound Early reflections Reverberation Level Test tone Signal given out by the receiver for adjusting the speaker volume. The test tone will come out as follows: • In a system with a center speaker (NORMAL/WIDE/3 CH LOGIC modes) The test tone is output from the front L (left), center, front R (right), and rear speakers in succession. Front (L) Front (R) Center 3 CH LOGIC Rear (L, R) NORMAL/WIDE • In a ...
Эта инструкция также подходит к моделям:Ресиверы и усилители - STR-GA8ES (1.24 mb)