Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• When Subwoofer output sound is required, select “FRNT NORMAL”, or select both “FRNT LARGE” and “SW RE-MIX ON”. • After setting SW (Subwoofer) from OFF to ON, SB/SW AMP setup display will appear to enable you to re-select either SW or SB from the Surround Back speaker or Subwoofer terminal. 3 Press the . ..... key or # key to accept the setting. • The front speakers setting indication “FRNT” appears. L R SP STEREO AB 4 Use the MULTI CONTROL knob or Multi (%/fi) keys to select the appropriate front speakers setting. 1 FRNT NORMAL : Average size Front speakers are connected to this model. 2 FRNT LARGE : Large Front speakers are connected to this model. • For “FRNT LARGE” selection, no sound will be heard from Subwoofer speaker even when it is set to on. However, if you select “SW RE-MIX ON” when Subwoofer is selected, you will be able to hear sound from the Subwoofer. When in STEREO mode, the sound goes directly to Front Speaker. 5 Press the . ..... key or # key to accept the setting. • The Center Speaker setting indication “CNTR” appears. Continued to next page 17 EN Preparing for surround sound Preparing for surround sound 6 Use the MULTI CONTROL knob or Multi (%/fi) keys to select the appropriate center speaker setting. If you selected “LARGE” as the Front Speakers setting, 1 CNTR NORMAL : An average size Center Speaker is connected to this model. 2 CNTR LARGE : A large Center Speaker is connected to this model. 3 CNTR OFF : Center Speaker setting mode to this model is OFF. If you selected “NORMAL” as the Front Speakers setting, 1 CNTR NORMAL : An average size Center Speaker is connected to this model. 2 CNTR OFF : Center Speaker setting mode to this model is OFF. 7 Press the . ..... key or # key again to accept the setting. • The Surround Speaker indication “SURR” appears. 8 Use the MULTI CONTROL knob or Multi (%/fi) to select the appropriate Surround Speaker setting. If you selected “LARGE” as the Center Speaker setting, 1 SURR NORMAL : Average size Surround Speakers are connected to this model. 2 SURR LARGE : Large Surround Speakers are connected to this model. 3 SURR OFF : Surround Speaker setting mode to this model is OFF. If you selected other than “LARGE” as the Center Speaker setting, 1 SURR NORMAL : Average size Surround Speakers are connected to this model. 2 SURR OFF : Surround Speaker setting mode to this model is OFF. • When the setting “SURR OFF” is selected, the procedure skips to step !. 9 Press the . ..... key or # keys again to accept the setting. • The Surround Speaker setting indication “SB” appears. 0 Use the MULTI CONTROL knob or Multi (%/fi) keys to select appropriate Surround Back Speaker setting. If you selected “LARGE” as the Surround Speaker setting, 1 SB NORMAL : Average size Surround Back Speaker is connected to this model. 2 SB LARGE : Large Surround Back Speaker is connected to this model. 3 SB OFF : Surround Back Speaker setting mode to this model is OFF. SB SP STEREO AB If you selected “NORMAL” as the Surround Speaker setting, 1 SB NORMAL : Average size Surround Back Speaker is connected to this model. 2 SB OFF : Surround Back Speaker setting mode to this model is OFF. • After setting SB (Surround Back) from OFF to NORMAL, SB/SW AMP setup display will appear to enable you to re-select either SW or SB from the Surround Back Speaker or Subwoofer terminal. ! Press the . ..... key or # key again to accept the setting. • The Subwoofer remix setting indication “SW RE-MIX” appears. @ Use the MULTI CONTROL knob or Multi (%/fi) keys to select the appropriate Subwoofer re-mix setting. 1 SW RE-MIX ON : Subwoofer re-mix setting mode to this model is ON. 2 SW RE-MIX OFF : Subwoofer re-mix setting mode to this model is OFF. • If Subwoofer is turned off, Subwoofer re-mix setting is not visible. # Press the SETUP key again to return to the main setup displays. 5 Adjust the speaker volume level. From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same. • In steps 5 and 6, indications appear only for the selected channels of the speakers that require adjusting. 1 Press the . ...../. ..... keys or @/#keys to select TEST TONE. • This model enters the speaker volume level adjustment mode. 2 Press the SETUP key for the following displays: 1 T.TONE AUTO 2 T.TONE MANUAL 3 The selection of AUTO/MANUAL TEST TONE is done by the MULTI CONTROL knob or Multi (%/fi) keys. Press the SETUP key again to begin TEST TONE. Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the volume level of the test tone output from the speaker channel to be adjusted. For AUTO selection, the first test tone is heard from the front left speaker for 2.5 seconds. The next test tone is heard from the speakers in the following sequence for 2 seconds each. LEFT CNTR RIGHT SR SUBW SL SBL SBR The channel indication blinks while the test tone is being output. L SP AB • If you have selected “SB/SW AMP SB”, “SBR” and “SBL” are not appeared but “SB” is appeared on the D...