Оценок - , средний балл:
(
)
)
Производитель: Kenwood
Размер: 1.3 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Select the “Input Digital” icon so that “Auto” is displayed. O When “Input Digital” is selected, the “Input Sound Status” menu screen appears. The display is alternated every time the “Input Digital” icon is selected. Auto += Manual O When “Auto” is displayed by selecting the “Input Digital” icon, the playback is switched automatically when the output signal from the source changes from a MPEG or Dolby Digital signal to a PCM signal. O If the digital input is not connected to the receiver, select “Input Analog”. “Auto” should be displayed in normal use. If you want to set the “Lstn Mode” to “Manual”, verify the surround play is still possible by referring to the table on the previous page. By setting the “Lstn Mode” to “Manual”, you can always use a fixed listen mode or select the desired listen mode every time. (With “Manual”, the listen mode can be selected whenever there is an input signal.) TunerCD1 Video2 Video3 Video4Video1TV1 Phono TV2 MD/ Tape1 CD2/ Tape2 Input Digital Input Analog AV AUX Macro Remote Mode Main Menu Input Digi Input Sound Status PCM Auto Input Signal 2 2 Open the “Lstn Mode” menu screen. 1 Select “Main Menu” icon. 2 Select “Lsn” icon. TunerCD1 Video2 Video3 Video4Video1TV1 Phono TV2 MD/ Tape1 CD2/ Tape2 Input Digital Input Analog AV AUX Macro Remote Mode Main Menu SndLsn Fnc Setup Pro Logic 3 Stereo Re-EQ Digital Lstn Mode Snd Fnc Stp Stereo AutoOn MPEG DSP ! 1 2 3 3 Display the component control screen. Operations Select the icon of the component to be played. (Example) To play a DVD disc, make sure that the DVD player is assigned to “Video4” and select the “Video4” icon. O Select the icon of the component which has been assigned in “Assigning the connected components to the selected inputs”. ( TunerCD1 Video2 Video3 Video4Video1TV1 Phono TV2 MD/ Tape1 CD2/ Tape2 Input Digital Input Analog AV AUX Macro Remote Mode Main Menu Play the software. Select the play key of the component to be played. . When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital or MPEG. Adjust the volume. ¦ O If you want to change each speaker’s volume temporarily : U Ambience effects KRF-V7771D (En/T) 46 6 ch input play 2 2 1 1 Turn off the system. Connect your DVD player to a muti-channel decorder (surround processor) and connect the 3 3 decorder to the receiver’s VIDEO 4 6CH. INPUT jacks. ! Set the VIDEO 4 INPUT switch ( placed on the rear panel ) to 6CH position. ! 4 4 Turn back on the system. 5 5 Select “Video 4” as the iput source. O Make sure the DVD player connected to the VIDEO 4 6CH. INPUT jacks is registered as VIDEO 4 input. TunerCD1 Video2 Video3 Video4Video1TV1 Phono TV2 MD/ Tape1 CD2/ Tape2 Input Digital Input Analog AV AUX Macro Remote Mode Main Menu Video 4 6 6 Select “Input Analog” icon. Start playback.7TunerCD1 Video2 Video3 Video4Video1TV1 Phono TV2 MD/ Tape1 CD2/ Tape2 Input Digital Input Analog AV AUX Macro Remote Mode Main Menu Input Anal Operations 8 8 O When switched to the 6ch input mode, the speakers system A will Adjust the volume. ¦ be on automatically, and the speakers system B cannot be selected. . It is not possible individually to adjust the volume level or sound quality of the separate channels when the receiver is in the 6ch input mode. Adjust the volume with the controls of the DVD player or the surround processor. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control. . When in the 6ch input mode, you can still use the VOLUME contol and MUTE key. Ambience effects KRF-V7771D (En/T) Checking the surround play status The surround mode and input signal used in the current playback session can be displayed. 1 1 Open the “Lstn (Listen) Mode” menu screen. 1 Select the “Main Menu” icon. 2 Select the “Lsn” icon. O The surround mode in use can be shown in the “Lstn Mode” menu screen. 3 Select the ! icon. TunerCD1 Video2 Video3 Video4Video1TV1 Phono TV2 MD/ Tape1 CD2/ Tape2 Input Digital Input Analog AV AUX Macro Remote Mode Main Menu SndLsn Fnc Setup Pro Logic 3 Stereo Re-EQ Digital Lstn Mode Snd Fnc Stp Stereo AutoOn MPEG DSP ! 1 2 3 2 2 Display in the “Input Sound Status” menu screen. O The “Input Sound Status” menu screen shows the signal being played. O During playback in Dolby Digital (AC-3) or MPEG mode, the input signals from the source component are shown using icons such as “L”, “C” and “R”. Input Sound Status LS LFE RS L C R Dolby Digital Auto Input Signal Cinema Re-EQ Because a film’s soundtrack is meant to be heard in a large theater with dozens of speakers, movies can sound much different when played in a typical room at home. This Cinema Re-EQ brings a film’s soundtrack closer to that you hear in a theater by creating a more spacious, enveloping surround-sound environment. Apply this effect when you are enjoying a movie. (Make sure your system has surround speakers.) Pro Logic 3 Stereo Re-EQ Digital Lstn Mode Snd Fnc Stp Stereo AutoOn MPEG DSP ! Cinema Re...