Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Kenwood, модель KRF-V7300D

Производитель: Kenwood
Размер: 1.58 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


. ¤CAUTION The power of this equipment will not be completely cut off from the wall outlet when the power switch is turned off. Install the equipment so that the wall outlet is easily accessible and, in case of emergency, immediately unplug the power cord from the wall outlet. ¤CAUTION Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard. • Do not install the unit on the rear, side or top panel. • Do not cover the unit with a cloth or install the unit on a carpet or mattress. • Do not install the unit in a poorly ventilated place. • This unit is using the cooling fan. Do not place the unit onto a bed, a sofa, a carpet, or similar. Sucked-in dust can cause fire. • Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below. Side panel : 10 cm Back panel : 10 cm Center speaker Front speaker Subwoofer Listening position Surround speaker Front speaker Surround speaker Surround Back speaker (6.1ch) Surround Back speaker (7.1ch) Front speakers Install in the front left and right positions. Symmetrical installation is ideal. The front speakers are always used regardless of the listen mode. Center speaker Install in the front center position. This speaker improves the acoustic image positioning and reproduction of sound movement. Surround speakers Install straight on or slightly behind the left and right of the listening position, at in an as high as possible height (ideally one meter above the height of the listener’s ears). Symmetrical installation is ideal. The surround speakers reproduce the feeling of movement and presence of sound. Subwoofer In general, install on the front center position near the front speakers. The subwoofer reproduces the powerful bass effects. As it is less directional to other speakers, it can be installed so that the bass can be reproduced best according to the listening room layout. Surround Back speakers Install on the rear of the listening position, at the same height as the surround speakers. When only one surround back speaker is installed, the system becomes a 6.1-channel surround system. When two surround back speakers are installed, it becomes a 7.1-channel surround system. • Ideal surround play is possible when all of the speakers above are installed. If the center speaker and/or the subwoofer is not installed, the system optimizes playback according to the current system by assigning the sound of absent channels to other speakers. 14 KRF-V9300D/KRF-V8300D/KRF-V7300D Connecting components equipped with HDMI terminals Connecting components equipped with HDMI terminals The HDMI connection can transfer both the video and audio signals through a single HDMI cable. It makes possible entertainment of high- quality video recorded on Blu-ray discs as well as high-quality audio including Dolby TrueHD, DTS-HD Master Audio and multi-channel PCM audio. The HDMI connection also enables interlocking of the power of the TV with that of this unit and adjustment of the volume of this unit from the TV. (See ‚.) 1 Using an HDMI cable, connect the HDMI input terminal ([DVD IN] or [VIDEO2 IN] terminal) of this unit to the HDMI output terminal of a playback component such as a DVD player. 2 Using another HDMI cable, connect the [HDMI MONITOR OUT] terminal of this unit to the HDMI input terminal of the TV monitor. Connections EO1 IN VIDEO1 INMONITOR OUT MONITOR OUT DVD IN DVD IN VIDEO2 IN O1 OUT CD(ASSIGNABLE) VIDEO2 DVD DVD IN OPTICAL OPTICAL COAXIAL VIDEO2 IN MONITOR OUT HDMIDIGITAL IN S-VIDEO VIDEO COMPONENT VIDEO + . GRAY BLUEGREEN TAN BROWN CENTER SURROUND SURROUND BACK 500mA od Y CB CR VIDEO2 IN Y CB CR LR LR SURROUND SPEAKERS (6 – 16 DVD IN VIDEO2 IN MONITOR OUT HDMI MONITOR IN HDMI OUT HDMI OUT TV Monitor Video Player DVD Player Using the HDMI function The HDMI setup is required to use the HDMI function. First enable the HDMI input as described in ‚. Flow of video signal The digital video signal input from the HDMI input terminal is output only at the HDMI monitor output terminal. KRF-V9300D only : The video up-conversion function can output the video signal input from the VIDEO, S-VIDEO and COMPONENT VIDEO terminals at the HDMI output terminal. (See

Эта инструкция также подходит к моделям:
Ресиверы и усилители - KRF-V8300D (1.58 mb)
Ресиверы и усилители - KRF-V9300D (1.58 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории