Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Kenwood, модель KRF-V6100D

Производитель: Kenwood
Размер: 1.3 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


(–15 dBm ~ –21 dBm), 660 nm ±30 nm Coaxial ................................................................... 0.5 Vp-p / 75 . VIDEO section VIDEO inputs / outputs VIDEO (composite) ................................................. 1 Vp-p / 75 . S-VIDEO inputs /outputs (KRF-V6100D) S-VIDEO (luminance signal) .................................. 1 Vp-p / 75 . S-VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 . COMPONENT VIDEO inputs /outputs (KRF-V6100D) COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 . COMPONENT VIDEO (CB/CR-signal) ................. 0.7 Vp-p / 75 . FM tuner section Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz Usable sensitivity (DIN at 75 .) MONO.....................1.3 .V / 13.2 dBf (40 kHz DEV., S/N 26 dB) STEREO ................... 45 .V / 42.1 dBf (46 kHz DEV., S/N 46 dB) Total harmonic distortion (DIN at 1 kHz) MONO..........................................................0.2% (71.2 dBf input) STEREO ....................................................... 0.8% (71.2 dBf input) Signal to noise ratio (DIN weighted at 1 kHz) MONO................................. 65 dB (40 kHz DEV., 71.2 dBf input) STEREO .............................. 60 dB (46 kHz DEV., 71.2 dBf input) Stereo separation (DIN 1 kHz) ................................................... 36 dB Selectivity (±300 kHz) ................................................................. 64 dB Frequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dB AM tuner section Tuning frequency range.................................... 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod., S/N 20 dB) ........ 16 .V / (600 .V/m) Signal to noise ratio (30% mod., 1 mV input) .................................................................. 50 dB (60 dB.V EMF input) GENERAL Power consumption ................................................................. 280 W Standby Power consumption ................................... less than 0.9 W AC outlet SWITCHED ...................................................... 2 (total 90 W max.) Dimensions .................................................... W: 440 mm (17-5/16") H : 143 mm (5-5/8") D : 303 mm (11-15/16") Weight (Net) .............................................................. 7.8 kg (17.2 lb) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 35 EN Caution: Read this page carefully to ensure safe Specifications (For Australia) operation. AUDIO section Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) DIN/IEC (63 kHz ~ 12.5kHz, 0.7% T.H.D., at 8 .) ............................................................................... 100 W + 100 W Effective power output during STEREO operation RMS (1 kHz, 10 % T.H.D. at 8 .) ............................. 120 W + 120 W Effective power output during SURROUND operation FRONT (1 kHz, 0.7% T.H.D. at 8. one channel driven) ..... 100 W + 100 W (1 kHz, 10% T.H.D. at 8. one channel driven) ...... 120 W + 120 W CENTER (1 kHz, 0.7% T.H.D. at 8. one channel driven) ........................ 100 W (1 kHz, 10% T.H.D. at 8. one channel driven) ......................... 120 W SURROUND (1 kHz, 0.7% T.H.D. at 8. one channel driven) ..... 100 W + 100 W (1 kHz, 10% T.H.D. at 8. one channel driven) ...... 120 W + 120 W SURROUND BACK (KRF-V6100D) (1 kHz, 0.7 % T.H.D. at 8 . one channel driven) ...................100 W (1 kHz, 10 % T.H.D. at 8 . one channel driven) ....................120 W Total harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8.) Frequency response (IHF’66) CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dB Signal to noise ratio (IHF’66) CD/DVD ................................................................................. 95 dB Input sensitivity / impedance CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 k. DVD/6CH INPUT ................................................. 550 mV / 15 k. Output level / impedance MD TAPE REC ........................................................ 550 mV / 1 k. PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 k. PRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 k. Tone control BASS ................................................................ ±10 dB (at 100 Hz) TREBLE ............................................................ ±10 dB (at 10 kHz) Loudness control VOLUME at -30dB level ................................... +8 dB (at 100 Hz) DIGITAL AUDIO section Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical ........................... (–15 dBm ~ –21 dBm), 660...

Эта инструкция также подходит к моделям:
Ресиверы и усилители - KRF-V5100D (1.3 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории