Оценок - , средний балл: ( )

Инструкция по эксплуатации Kenwood, модель KR-V6040

Производитель: Kenwood
Размер: 405.5 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

See Figure. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE NEC - NATIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ■GROUNDING CONDUCTORS (NEC SECTION 810-21) ' GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART HI 18. Power lines — An outdoor antenna should be located away from power lines. 19. AC outlets — Do not connect other audio equipment with a power .consumption larger than that specified to the AC outlet on the rear panel. Never connect other electrical units, such as an iron or toaster, to it to prevent fire or electric shock. 16. Servicing — The user should not attempt to service the unit beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 17. Outdoor antenna grounding — If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding con- Notes:--- 1. Item 3 is not required except for grounded or polarized equipment. 2. Item 17 and 18 are not required except for units provided with antenna terminals. 3. Item 17 complies with UL in the U.S.A. KR-V6040 (En) 5 System connections Make connections as shown in the diagram below. When connecting the related system components, refer also to the instruction manuals of the related components. Do not plug in the power lead until all connections are completed. ■ Connection of audio components For the connection of video components, please refer to page 20. Rear speakers Right Left Speaker system A Right Left Speaker system B Right Left FM DE-EMPHASIS/ CHANNEL SPACE switch (Except for some areas.) Refer to the 'Antenna connections* section. Notes: 1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced. 2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit. 3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. 6 KR-V6040 (En) ■ Connection of speakers Speaker terminals for general ® Push lever down. Insert cord. 1 Lock lever. Front speaker terminals for Europe • Never short-circuit the + and - speaker cords. • If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly. Setting the SPEAKER IMPEDANCE SELECTOR When using the speaker A or speaker B separately Speaker Impedance Selector position 4fl, 6ÎÎ A or B: LESS THAN 8 ÎÎ 8fl, 16 fl 8ÎÎ OR MORE When using the speaker A and B simultaneously Speaker Impedance Selector position 8fl, 16 fl A and B: 8 ÎÎ OR MORE According to the impedance of the speakers used, set the SPEAKER IMPEDANCE SELECTOR on the rear panel as shown in the table. • When the IMPEDANCE SELECTOR switch is set to “8 ÎÎ OR MORE', it is impossible to use the A and B speakers at the same time. Therefore, when using the speakers A and B simultaneously, be sure to set the IMPEDANCE SELECTOR switch to the "A and B: 8 ÎÎ OR MORE' position. • During speaker system connection and operation of the SPEAKER IMPEDANCE SELECTOR, set the POWER key to OFF. IMPEDANCE SELECTOR AorB : LESS THAN 8.0 AorB: AandB:8o OR MORE 80 OR MORE Û v KR-V6040 (En) 7 System connections Connection of antennas AM loop antenna connection The supplied antenna is for indoor use. Place it as far as possible from the main system, TV set, speaker cords and power cord, and set it to a direction which provides the best reception. AM outdoor antenna connection If the reception is poor when the AM loop antenna is used, distribute a vinyl-coated wire of more than 6 meters outdoors, without disconnecting the loop antenna. FM indoor antenna connection The supplied antenna is for indoor use. For stable reception, remove the indoor antenna after installing an outdoor antenna as soon as possible. © Find the position that provides best reception. @ Fix two ends. (- FM outdoor antenna connection It is recommended to install an exclusive FM outdoor antenna to capture FM broadcasts with high sound quality. Use a coaxial cable for the connection between the outdoor antenna and FM ANTENNA terminal on the rear panel. p ilöll ANTCMNA t !- ,-c lËÜI pli :U TStl J 8 KR-V6040 (En) ■ 75Q coaxial cable connection (For Europe) © Arrange the coaxial cable as illustrated. RG-6 (5C-2VI or RG-59 (3C-2VI Open the antenna adapto...