Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
If no PS data was sent, "NO PS" is displayed. TUNED AUTO STEREOANT A AR RDS FM BBC1 FM 2 RT (Radio Text) Display: When text data is received after 'RT' flashes in RDS broadcast reception, text appears in the display scrolling from right to left (up to 64 characters). TUNED AUTO STEREOANT A AR RDS FM BACEDFGH 3 CT (Clock Time) Display: The hours and minutes are displayed after "CT" flashes in RDS broadcast reception. TUNED AUTO STEREOANT A AR RDS FM PM1234: 4 Frequency Display: The frequency of the current station is displayed. TUNED AUTO MHz STEREOANT A AR RDS FM -- )125). Storing broadcast stations in memory KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 : Keys or controls to be used in this operation. The automatic memory function allows you to store up to 40 stations using only one button. The manual preset function allows you to store stations one at a time. Use the automatic memory function first. DOWN UP TUNING/MULTI CONTROLHIGHBLEND WIDE NARROW RFATT TUNING MODE +10/CLEAR 1 ACTIVE RECEPTION IF BAND RF ATT TA/NEWS PTY/ PTY SCARCH DISPLAY ANT A/B MEMORY AM-FM STEREO SYNTHESIZER TUNER KTF-3010 BAND P. CALL 3 4 5 6 7 8 9 0/CHARA.2 ON/STANDBY R D S AUTO MEMORY (Storing stations automatically in memory ) The tuner completes the scanning of frequencies in 5 minutes. While scanning, "AUTO" and "MEMORY" are displayed in turn. OUnless stations are stored with the automatic memory function, EON reservation and PTY search will not work. OAR will not work when the automatic memory function is on. OBroadcast stations stored manually may be overwritten. OStations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS stations, the stations currently preset at numbers 01- 15 are replaced by the RDS stations.) OIf the antenna is replaced, you will have to reset the automatic memory function. OStored stations may be erased from the memory. MANUAL PRESET(Storing stations one at a time) 1 1 Tune in the station to be preset 2 2 Press the MEMORY key Perform the operations in the five seconds that the display is blinking. TUNED AUTOMHzSTEREOMEMOAR 1089)) FM (If more than 5 sec. have elapsed, press the MEMORY key again.) Lights (for 5 sec.) Blinks Lights (for 5 sec.) 1 Turn the TUNING/MULTI CONTROL knob. 2 Select the desired station. DOWN UP TUNING/MULTI CONTROL MEMORY Press the numeric keys (0 to 9, +10) in the following order. To select “15”...0,5To select “20”...0,0, ) Instead of steps 1and 2, you can use the numeric keys (0~9,+10), to store the broadcast stations. 01,02,03 38,39,40 ORepeat steps 1 to 3 for each of the stations to be stored in memory. OIf a station is stored in a preset number which already stores a station memory under it, the previous memory is replaced by the new memory content. OOnce the memory content has been preset, it is held for about 3 days even after the power cord is unplugged from the mains outlet. OYou cannot enter numbers over 40. OIf you make a mistake when pressing the 0 key, press the 0 key several times to return to the original display before re-entering. OThe stored station will be erased from the memory. The AUTO MEMORY function automatically calls up only those stations which have RDS broadcasts for storing (up to 40 stations can be stored). MEMORY 1 Switch to FM band. 2 Press and hold the MEMORY key (for more than 2 seconds). MEMORY If you press the MEMORY key when the preset number dis- played is "- -", the smallest unstored number appears. 3 3 Select one of the preset numbers from 1 to 40. TUNED AUTO MHz STEREOANT A MEMOAR FM 51 9) )). The numbers 1 to 40 appear, in turn, as you turn the knob. Receiving a preset station KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 HIGHBLEND WIDE NARROW RFATT TUNING MODE +10/CLEAR 1 ACTIVE RECEPTION IF BAND RF ATT TA/NEWS PTY/ PTY SCARCH DISPLAY ANT A/B MEMORY AM-FM STEREO SYNTHESIZER TUNER KTF-3010 DOWN UP TUNING/MULTI CONTROL 3 4 5 6 7 8 9 0/CHARA.2 ON/STANDBY R D S BAND P. CALL : Keys or controls to be used in this operation. Receiving a preset station 1 1 Set to the Call up (Sellect) mode. P. CALL OPress P.CALL key once more to cancel the call up mode and return to the original display. ............................................................................................................................ 2 2 Select one of the preset numbers. DOWN UP TUNING/MULTI CONTROL When you stop turning the knob, you tune in on the preset station. Instead of steps 1 and 2, you can use the numeric keys (0~9,+10), to store the broadcast stations. Press the numeric keys (0 to 9, +10) in the following order. To select “15”...0,5To select “20”...0,0, ) Blinks for 5 sec. OWhile the display is blinking, you can select the next station. OIf the tuner has stored a preset station name or program service name, each will be displayed. OYou cannot enter numbers over 40. OIf you make a mistake when pressing the 0 key, press the 0 key several times to retu...
Эта инструкция также подходит к моделям:Ресиверы и усилители - KTF-2010 (255.1 kb)