Оценок - , средний балл:
(
)
)
Производитель: Kenwood
Размер: 285.78 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
After completing connections, fasten terminal cover5over terminal bracket. Terminal cover (Accessory5) Lead terminal (Commercially available) Car fuse box (Main fuse) Terminal cover (Accessory5) ) Sirius antenna (Separated-sale product) ¦ If you want to connect KCA-S210A Connect the KTC-SR901 to the terminal labelled TO CHANGER 2. CHANGER CHANGER 2 TO CHANGER 1 TO H/U TO SWITCH AUX OFF ON SWITCH PROTOCOL O N IN AUX ]“N” HEAD UNIT TO TO Disc changer Control unit KCA-S210A Sirius Satellite Radio tuner NOTE Set the PROTOCOL selection switch to "N" position. English-9 10 -English SIRIUS SATELLITE RADIO TUNER KTC–SR901 FUSE 3A TO HEAD UNITTO CHANGER BATT GND TERR SAT ANT • Installation using the self-tapping screws Carpet Board etc. thickness: 20 mm or more Carpet Accessory Accessory4 (O5 . 20 mm) 2 Accessory3 (M4 . 8 mm) • Installation using the velcro tapes Accessory6 Installation ¦ Mounting the Sirius Satellite radio tuner Unit • Install the Sirius satellite radio tuner unit in a well-ventilated location and do not place objects on top of it. • The Sirius satellite radio tuner unit is equipped with a cooling fan to lower the internal temperature. Do not block the holes of the cooling fan at the time of installation. Blocking the holes of the cooling fan will cease to allow the temperature to be lowered and will cause breakdown. • When installing to the car, the unit should be securely fastened at a location that will not interfere with driving. 2CAUTION • When making a hole in the chassis, check that the gas tank, break pipe, wire harness, or other part is not located on the other side, and be careful not to cause scratches. •When attaching the mounting fittings (Accessory2) to the Sirius satellite radio tuner unit, use only the supplied mounting screws (Accessory3) (M4 x 8 mm). Use of screws other than those supplied may result in internal damage or insecure mounting and is very dangerous. Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could lead to injury or accident should the unit come off due to a shock and strike a person or an important component. Tapping screws should be used for mounting. (Attachment with velcro strips, although easy, can come off with a shock.) 2CAUTION Troubleshooting Guide Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The Sirius mode cannot be selected. The Sirius connection wire is not connected. Use the Sirius connection wire to connect the control unit and the Sirius satellite radio tuner. Connect the power supply of the Sirius satellite radio tuner. Connect the battery wire and ground wire to the Sirius satellite radio tuner. The PROTOCOL selection switch of the changer switching unit "KCA-S210A" is not set properly. Set the PROTOCOL selection switch to "N" position. The changer switching unit "KCAS210A" is not connected properly. Connect the KTC-SR901 to the terminal labelled TO CHANGER 2. See the section on "Connecting Wires to Terminals". The fuse has blown. After checking for short circuits in the wires, replace the fuse with one having the same rating. Nothing happens when the buttons are pressed. The computer chip in the unit is not functioning normally. Press the reset button on the Control unit . No sound can be heard, or the volume is low. The input/output wires or wiring harness are connected incorrectly. Reconnect the input/output wires and/or the wiring harness correctly. See the section on "Connecting Wires to Terminals". No broadcast can be received. The Sirius antenna is not connected. Connect it properly by referring to "Connecting Wires to Terminals". No subscription is established. Subscribe to SIRIUS. The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. ANTENNA ERROR / ANT ERR : Antenna is not connected correctly. ]Make sure the antenna is connected correctly and then turn OFF/ON of the SIRIUS source or Control unit. TUNER ERROR / TUNE ERR : Broadcast cannot be received due to an error in this unit. ]Turn OFF/ON of the SIRIUS source or Control unit, or press the reset button of Control unit. ESN ERROR / ESN ERR : ESN (Electronic Serial Number) is not registered in this unit. ]Consult your nearest service center. English-11 Specifications Specifications Sirius tuner section Frequency range (Overall) ..................................................2320 MHz – 2332.5 MHz (TDM Channel#1(fc)) ................................................2322.293 MHz (COFDM Channel(fc)) ................................................2326.25 MHz (TDM Channel#2(fc)) ................................................2330.207 MHz Usable sensitivity (TDM Channel) ............................................ - 74 dBm – - 46 dBm (COFDM Channel) ..........................